jaspector
§ PA Bucks County
City building permits

Falls Township

How to apply for a building permit in Falls Township, Pennsylvania. Permit authority, application steps, fees, and inspection requirements.

Code adoption
Pennsylvania UCC
Last verified
April 2026
On this page 6
§ 01

Permit authority

Falls Township Code Enforcement and Zoning

Street address
188 Lincoln Highway, Fairless Hills, PA 19030
Coverage
Township-level code enforcement, zoning, U and O, and permit administration.
§ 02

When a permit is required

Permit triggers and exempt work for Falls Township

Township publishes forms for alterations, accessory structures, flood hazard permits, business licenses, rental and resale U and O, zoning verification, special inspections, telecom, and many other permit types.

Agricultural building exemption available (form posted separately)
  • Exempt Agricultural building exemption available (form posted separately)

Note: No consolidated exempt-work handout was located in the reviewed Falls sources. Falls publishes separate permit forms for many common project types, so verify work against the Township form library before assuming exemption.

Required documents
  • Depends on permit type
  • Applications and technical support forms are posted individually
Building code
Pennsylvania UCC
Permit validity
Renewals or extensions on permits are $100 per calendar year under the fee schedule.
Owner-builder
Not clearly posted in the reviewed sources.
Contractor requirements
Township publishes out-of-town business license application for contractors. PA home improvement registration still applies where required.
§ 03

Application process

Application → plan check → issuance → inspection → final

  1. 01
    Select the applicable permit or application form from Falls Township Permits and Application Forms.
  2. 02
    Submit the completed application with required supporting materials and fee.
  3. 03
    Township performs review and, where applicable, zoning/U and O review.
  4. 04
    Schedule required inspections and complete the inspection sequence.
  5. 05
    Obtain final signoff, certificate, or U and O approval.

Source: Falls Township Code Enforcement and Zoning ↗

§ 04

Fee schedule

Effective 2026

Fee type
Amount
01
Minimum permit fee
$25 for single trade; $125 for multiple trade; Commonwealth UCC surcharge $4.50 per permit
02
Plan check fee
Review fee per page of plans once original plans approved is $50 per page
03
Permit fee formula
Residential building fee is $100 for first $1,000, then $32 per thousand up to $20,000, then $12 per thousand above; commercial/industrial structural fees are valuation based at $110 per thousand for first $50,000, then stepped down
04
Reinspection fee
Commercial/industrial reinspection for cause fees are scheduled by square-foot tier
05
Penalty (no permit)
Permits are doubled if work starts before required permits are obtained

Fee due upon permit application submission

Fees change periodically. Confirm at the official fee schedule ↗ (effective 2026) before budgeting.

§ 05

Required inspections

Scheduling and sequence

How to schedule
  • (215) 949-9000 (phone)
Scheduling deadline
Confirm with Township at filing
Inspection hours
Confirm with Township at filing

Typical sequence: Permit review, required trade/building inspections, U and O/resale inspection as applicable

§ 06

Frequently asked

Common questions about Falls Township permits

01 Do I need a building permit in Falls Township, PA?
Township publishes forms for alterations, accessory structures, flood hazard permits, business licenses, rental and resale U and O, zoning verification, special inspections, telecom, and many other permit types.
02 How much does a building permit cost in Falls Township, PA?
Building permit fees in Falls Township, PA are set by the local building department and vary by project type and valuation. The minimum permit fee is $25 for single trade; $125 for multiple trade; Commonwealth UCC surcharge $4.50 per permit. Fees are calculated as: Residential building fee is $100 for first $1,000, then $32 per thousand up to $20,000, then $12 per thousand above; commercial/industrial structural fees are valuation based at $110 per thousand for first $50,000, then stepped down. Plan check fee: Review fee per page of plans once original plans approved is $50 per page.
03 How do I apply for a building permit in Falls Township, PA?
To apply for a building permit in Falls Township, PA, follow these steps: 1. Select the applicable permit or application form from Falls Township Permits and Application Forms. 2. Submit the completed application with required supporting materials and fee. 3. Township performs review and, where applicable, zoning/U and O review. 4. Schedule required inspections and complete the inspection sequence. 5. Obtain final signoff, certificate, or U and O approval.
04 What work is exempt from building permits in Falls Township, PA?
Not all construction work requires a permit in Falls Township, PA. The following work is generally exempt: Agricultural building exemption available (form posted separately). Note: No consolidated exempt-work handout was located in the reviewed Falls sources. Falls publishes separate permit forms for many common project types, so verify work against the Township form library before assuming exemption. When in doubt, confirm with the local building department before starting work.
05 How do I schedule a building inspection in Falls Township, PA?
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Falls Township, PA via: (215) 949-9000. Confirm with Township at filing.
last verified April 2026 source Falls Township Code Enforcement and Zoning ↗ entry id permits/pennsylvania/bucks/falls-township

Educational reference. Permit rules and fees change — confirm current requirements directly with Falls Township Code Enforcement and Zoning before applying. Jaspector is not legal advice.