On this page 6
§ 02
When a permit is required
Permit triggers and exempt work for Indian Trail
Town permits required for zoning verification, interior upfits in existing buildings, new residential work, additions, pools, driveways, accessory structures, and other listed activities.
Like-for-like water heater replacement with no change in fuel, source, location, capacity, venting, or piping
Like-for-like electrical device and fixture replacements
Minor alterations under $15,000 that do not involve structural, plumbing, HVAC, or electrical changes
- Exempt Like-for-like water heater replacement with no change in fuel, source, location, capacity, venting, or piping
- Exempt Like-for-like electrical device and fixture replacements
- Exempt Minor alterations under $15,000 that do not involve structural, plumbing, HVAC, or electrical changes
Note: Work routed to Union County follows county/state exemptions. Confirm before starting work.
Required documents
- Permit-specific application
- As-built survey where required
- Plan submittal for additions and accessory structures
- Brief work description
- Project location and setback information
- Building code
- Building permit work enforced under NC State Building Code by Union County. Indian Trail zoning permits enforced under the town UDO.
- Permit validity
- Residential services permits expire 6 months from approval if work has not begun.
- Contractor requirements
- State licensing rules apply. Union County handles trade permit issuance for building code permits.
§ 03
Application process
Application → plan check → issuance → inspection → final
- 01 Confirm the permit type with Indian Trail Planning and select the applicable zoning or service permit form.
- 02 Submit the town zoning package with required plot plan or as-built survey and project description.
- 03 Obtain town zoning approval or local permit approval.
- 04 If building trades are involved, apply separately to Union County Building Code Enforcement for the building permit.
- 05 After approval, coordinate any required final town inspection and Union County building inspections before occupancy or project closeout.
§ 04
Fee schedule
Indian Trail building permit fees
Fee type
Amount
01
Minimum permit fee
$25 (demolition-accessory) to $150 (new home construction) for town; $100 for Union County building permit
02
Permit fee formula
Flat local zoning/service fees by permit type, plus separate Union County square-foot and trade-based building fees where applicable.
03
Reinspection fee
Union County reinspection: $120; extra inspection: $100
Town permit-specific fees shown on form packets. County building fees paid separately through Union County/Evolve.
Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.
§ 05
Required inspections
Scheduling and sequence
How to schedule
- Union County 704-283-3816 (phone)
- Union County Evolve (online)
- Time windows
- Union County states inspections are typically completed the day requested when workload allows.
Typical sequence: Town zoning/service permit first, then Union County building inspections where required, then any final town approval noted by permit type.
§ 06
Frequently asked
Common questions about Indian Trail permits
01 Do I need a building permit in Indian Trail, NC? ▸
Town permits required for zoning verification, interior upfits in existing buildings, new residential work, additions, pools, driveways, accessory structures, and other listed activities.
02 How much does a building permit cost in Indian Trail, NC? ▸
Building permit fees in Indian Trail, NC are set by the local building department and vary by project type and valuation. The minimum permit fee is $25 (demolition-accessory) to $150 (new home construction) for town; $100 for Union County building permit. Fees are calculated as: Flat local zoning/service fees by permit type, plus separate Union County square-foot and trade-based building fees where applicable..
03 How do I apply for a building permit in Indian Trail, NC? ▸
To apply for a building permit in Indian Trail, NC, follow these steps: 1. Confirm the permit type with Indian Trail Planning and select the applicable zoning or service permit form. 2. Submit the town zoning package with required plot plan or as-built survey and project description. 3. Obtain town zoning approval or local permit approval. 4. If building trades are involved, apply separately to Union County Building Code Enforcement for the building permit. 5. After approval, coordinate any required final town inspection and Union County building inspections before occupancy or project closeout.
04 What work is exempt from building permits in Indian Trail, NC? ▸
Not all construction work requires a permit in Indian Trail, NC. The following work is generally exempt: Like-for-like water heater replacement with no change in fuel, source, location, capacity, venting, or piping; Like-for-like electrical device and fixture replacements; Minor alterations under $15,000 that do not involve structural, plumbing, HVAC, or electrical changes. Note: Work routed to Union County follows county/state exemptions. Confirm before starting work. When in doubt, confirm with the local building department before starting work.
05 How do I schedule a building inspection in Indian Trail, NC? ▸
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Indian Trail, NC via: Union County 704-283-3816, Union County Evolve.
last verified April 2026
source Town of Indian Trail Planning Department (zoning); Union County Building Code Enforcement (building) ↗
entry id permits/north-carolina/union/indian-trail
Educational reference. Permit rules and fees change — confirm current requirements directly with Town of Indian Trail Planning Department (zoning); Union County Building Code Enforcement (building) before applying. Jaspector is not legal advice.