On this page 6
§ 02
When a permit is required
Permit triggers and exempt work for Albany
Albany requires a permit for construction, enlargement, alteration, repair, moving, demolition, and for installation or alteration of building, electrical, mechanical, and plumbing work unless the work is specifically exempt. Larger projects such as second-story additions, tenant improvements, and new construction require plan check review.
One-story detached accessory structures such as tool or storage sheds and playhouses not over 120 square feet
Fences not over 7 feet high under the building-code exemption
Oil derricks
Retaining walls not over 4 feet high unless supporting surcharge or impounding certain liquids
Water tanks on grade up to 5,000 gallons with qualifying height-to-width ratio
Sidewalks and driveways not more than 30 inches above adjacent grade, not over a basement/story below, and not part of an accessible route
Painting, papering, tiling, carpeting, cabinets, countertops, and similar finish work
Temporary motion picture, television, and theater stage sets and scenery
Above-ground prefabricated swimming pools accessory to Group R-3 occupancy that are less than 24 inches deep and not greater than 5,000 gallons
Shade cloth structures for nursery or agricultural purposes, excluding service systems
Swings and playground equipment accessory to detached one- and two-family dwellings
Window awnings in Group R-3 and U occupancies meeting the listed projection/support limits
Nonfixed and movable fixtures, cases, racks, counters, and partitions not over 5 feet 9 inches high
Minor listed electrical, gas, mechanical, and plumbing repair items, portable equipment, leak stoppage, and similar limited work described in the City's exemption handout
- Exempt One-story detached accessory structures such as tool or storage sheds and playhouses not over 120 square feet
- Exempt Fences not over 7 feet high under the building-code exemption
- Exempt Oil derricks
- Exempt Retaining walls not over 4 feet high unless supporting surcharge or impounding certain liquids
- Exempt Water tanks on grade up to 5,000 gallons with qualifying height-to-width ratio
- Exempt Sidewalks and driveways not more than 30 inches above adjacent grade, not over a basement/story below, and not part of an accessible route
- Exempt Painting, papering, tiling, carpeting, cabinets, countertops, and similar finish work
- Exempt Temporary motion picture, television, and theater stage sets and scenery
- Exempt Above-ground prefabricated swimming pools accessory to Group R-3 occupancy that are less than 24 inches deep and not greater than 5,000 gallons
- Exempt Shade cloth structures for nursery or agricultural purposes, excluding service systems
- Exempt Swings and playground equipment accessory to detached one- and two-family dwellings
- Exempt Window awnings in Group R-3 and U occupancies meeting the listed projection/support limits
- Exempt Nonfixed and movable fixtures, cases, racks, counters, and partitions not over 5 feet 9 inches high
- Exempt Minor listed electrical, gas, mechanical, and plumbing repair items, portable equipment, leak stoppage, and similar limited work described in the City's exemption handout
Note: Exempt work still must comply with all other laws and ordinances. Albany adds local caveats: exempt accessory buildings may still need a written permit exemption declaration from the City; residential-zone fences are generally limited to 6 feet by zoning even though the building-code permit exemption lists 7 feet; sidewalk and driveway-approach work in the public right-of-way requires an Albany encroachment permit issued only to licensed contractors; and emergency repair permit applications must be submitted by the next working business day.
Required documents
- At minimum, a completed building permit application. Depending on scope, Albany may require complete signed and sealed construction plans, structural calculations, stormwater requirements checklist, fire safety requirements checklist, soils report and engineer's conformance letter, product specifications, grant deed for some ADU/JADU work, private sewer lateral compliance certificate for projects over $100,000, site plan, elevations, floor plans, roof plans, survey, and other scope-specific submittal checklists.
- Building code
- Albany's posted code page states the City administers the California Building Standards Code and local Albany ordinances. Current City handouts and posted plan materials reference the 2022 California Building Standards Code / Title 24 cycle with Albany amendments, including local green building requirements.
- Permit validity
- The permit expires if work is not commenced within 365 days, or if no legitimate City inspections occur within any 365-day period. Albany's extension form states a maximum extension of 180 days for a building permit and 90 days for plan check.
- Owner-builder
- Owners may apply as owner-builders. Albany states the owner-builder applicant must own the property, treat it as their primary residence for at least 12 months before completion of the work, and complete the work themselves. The City also points applicants to the CSLB owner-builder rules and brochure.
- Contractor requirements
- State-licensed contractors may apply for and pull permits. If an agent applies, the performing state-licensed contractor must be listed. Any contractor or handyman hired to perform work in Albany must have a current Albany business license at permit issuance.
Source: City of Albany Community Development Department, Building Division ↗
§ 03
Application process
Typical processing: Small-scale over-the-counter residential permits are typically issued within 1-2 business days. Albany does not publish a general turnaround time for full plan review on the current pages reviewed.
- 01 Confirm whether the work is permit-exempt or whether it qualifies as a small over-the-counter permit versus a full plan review submittal.
- 02 Complete the City of Albany Building Permit Application and gather the required supporting PDFs for the project scope.
- 03 Email the application and supporting documents to `permits@albanyca.gov`. For larger projects, Albany requires electronic-only plan check submittals by PDF attachment or file-share link; no paper or in-person plan check package is accepted.
- 04 If the project needs plan review, include full plans, structural calculations, stormwater checklist, fire safety checklist, soils/conformance documents, and other supporting materials. Contact the Fire Prevention Bureau before finalizing plans if fire review is needed.
- 05 Pay the required permit or plan check fees. Albany states that required plan check fees must be paid before the application is processed.
- 06 Respond to any City or third-party plan check comments and resubmit revised documents as requested.
- 07 After approval, keep the permit and approved plans on site and schedule inspections with the Building Division.
- 08 Complete the required inspection sequence through final inspection and obtain final approval before occupancy or closeout.
Typical processing time: Small-scale over-the-counter residential permits are typically issued within 1-2 business days. Albany does not publish a general turnaround time for full plan review on the current pages reviewed.
Source: City of Albany Community Development Department, Building Division ↗
§ 04
Fee schedule
Albany building permit fees
Fee type
Amount
01
Minimum permit fee
Single-family residential building permit fee is $131.10 for permit valuation up to $2,000, plus the published application fee of $87.35, General Plan Update Fee of $8.00, and Tech Fee of $20.00.
02
Plan check fee
City Processing Fee is $262 for projects up to $100,000, $524 for $100,001-$500,000, $786 for $501,000-$1,000,000, and $1,048 over $1,000,000, plus consultant fee at actual cost. Additional plan review required by changes, additions, or revisions to plans is $524.
03
Permit fee formula
Mixed. Standard building permit fees are valuation-based, with separate valuation-based city processing fees and actual-cost consultant fees for plan review. Albany also publishes flat-rate permit and plan check fees for some work such as solar, reroof, signs, remodel/repair/windows/doors, and simple or complex MEP permits.
04
Reinspection fee
Re-Inspection Fee is $262. Inspections outside normal business hours are $290.81. Partial Permit Processing Fee is $420.77. No separate published "penalty fee" line for expired permits was identified in the FY 2025/26 community development fee sheet reviewed.
Albany states required plan check fees must be paid before applications are processed. The Finance Department's Resident Access page says permits and bills issued by Finance can be paid online, with a 3.95% credit card fee or $1.95 eCheck fee. However, Albany's December 24, 2025 Community Development scam alert says applicants should verify permit fees directly with staff, that staff will not request wire transfers, and that City permit payments are made in person at City Hall. Confirm the payment method with Albany before remitting fees.
Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.
§ 05
Required inspections
Scheduling and sequence
How to schedule
- Schedule by phone at (510) 528-5760 or by email to permits@albanyca.gov. Inspection information page: https://www.albany (online)
- https://www.albany (online)
- https://www.albanyca.gov/Departments/Community-Development/Building/Inspections (online)
- permits@albanyca.gov (email)
- (510) 528-5760 (phone)
- Scheduling deadline
- Schedule at least 3 business days in advance. Final inspections may require 5 working days' advance notice.
- Inspection hours
- Albany says the building inspection schedule is Monday through Thursday mornings only, with no afternoon inspections currently. Schedule at least 3 business days in advance. Cancel by 9:00 AM on the inspection day. Final inspections may require 5 working days' advance notice.
- Time windows
- Albany says the building inspection schedule is Monday through Thursday mornings only, with no afternoon inspections currently. Cancel by 9:00 AM on the inspection day.
Typical sequence: Typical sequence includes foundation, concrete slab or under-floor, nailing, rough plumbing, rough mechanical, electrical, structural frame, insulation, lath/wallboard, scratch coat where applicable, and final inspection. Planning & Zoning, Fire, Public Works, and Environmental Resources sign-offs must be complete before final occupancy.
Source: City of Albany Community Development Department, Building Division ↗
§ 06
Frequently asked
Common questions about Albany permits
01 Do I need a building permit in Albany, CA? ▸
Albany requires a permit for construction, enlargement, alteration, repair, moving, demolition, and for installation or alteration of building, electrical, mechanical, and plumbing work unless the work is specifically exempt. Larger projects such as second-story additions, tenant improvements, and new construction require plan check review.
02 How much does a building permit cost in Albany, CA? ▸
Building permit fees in Albany, CA are set by the local building department and vary by project type and valuation. The minimum permit fee is Single-family residential building permit fee is $131.10 for permit valuation up to $2,000, plus the published application fee of $87.35, General Plan Update Fee of $8.00, and Tech Fee of $20.00.. Fees are calculated as: Mixed. Standard building permit fees are valuation-based, with separate valuation-based city processing fees and actual-cost consultant fees for plan review. Albany also publishes flat-rate permit and plan check fees for some work such as solar, reroof, signs, remodel/repair/windows/doors, and simple or complex MEP permits.. Plan check fee: City Processing Fee is $262 for projects up to $100,000, $524 for $100,001-$500,000, $786 for $501,000-$1,000,000, and $1,048 over $1,000,000, plus consultant fee at actual cost. Additional plan review required by changes, additions, or revisions to plans is $524..
03 How do I apply for a building permit in Albany, CA? ▸
To apply for a building permit in Albany, CA, follow these steps: 1. Confirm whether the work is permit-exempt or whether it qualifies as a small over-the-counter permit versus a full plan review submittal. 2. Complete the City of Albany Building Permit Application and gather the required supporting PDFs for the project scope. 3. Email the application and supporting documents to `permits@albanyca.gov`. For larger projects, Albany requires electronic-only plan check submittals by PDF attachment or file-share link; no paper or in-person plan check package is accepted. 4. If the project needs plan review, include full plans, structural calculations, stormwater checklist, fire safety checklist, soils/conformance documents, and other supporting materials. Contact the Fire Prevention Bureau before finalizing plans if fire review is needed. 5. Pay the required permit or plan check fees. Albany states that required plan check fees must be paid before the application is processed. 6. Respond to any City or third-party plan check comments and resubmit revised documents as requested. 7. After approval, keep the permit and approved plans on site and schedule inspections with the Building Division. 8. Complete the required inspection sequence through final inspection and obtain final approval before occupancy or closeout.
04 How long does it take to get a building permit in Albany, CA? ▸
Building permit processing times in Albany, CA typically run Small-scale over-the-counter residential permits are typically issued within 1-2 business days. Albany does not publish a general turnaround time for full plan review on the current pages reviewed.. Timelines can vary based on project complexity and current department workload.
05 What work is exempt from building permits in Albany, CA? ▸
Not all construction work requires a permit in Albany, CA. The following work is generally exempt: One-story detached accessory structures such as tool or storage sheds and playhouses not over 120 square feet; Fences not over 7 feet high under the building-code exemption; Oil derricks; Retaining walls not over 4 feet high unless supporting surcharge or impounding certain liquids; Water tanks on grade up to 5,000 gallons with qualifying height-to-width ratio; Sidewalks and driveways not more than 30 inches above adjacent grade, not over a basement/story below, and not part of an accessible route; Painting, papering, tiling, carpeting, cabinets, countertops, and similar finish work; Temporary motion picture, television, and theater stage sets and scenery; Above-ground prefabricated swimming pools accessory to Group R-3 occupancy that are less than 24 inches deep and not greater than 5,000 gallons; Shade cloth structures for nursery or agricultural purposes, excluding service systems; Swings and playground equipment accessory to detached one- and two-family dwellings; Window awnings in Group R-3 and U occupancies meeting the listed projection/support limits; Nonfixed and movable fixtures, cases, racks, counters, and partitions not over 5 feet 9 inches high; Minor listed electrical, gas, mechanical, and plumbing repair items, portable equipment, leak stoppage, and similar limited work described in the City's exemption handout. Note: Exempt work still must comply with all other laws and ordinances. Albany adds local caveats: exempt accessory buildings may still need a written permit exemption declaration from the City; residential-zone fences are generally limited to 6 feet by zoning even though the building-code permit exemption lists 7 feet; sidewalk and driveway-approach work in the public right-of-way requires an Albany encroachment permit issued only to licensed contractors; and emergency repair permit applications must be submitted by the next working business day. When in doubt, confirm with the local building department before starting work.
06 How do I schedule a building inspection in Albany, CA? ▸
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Albany, CA via: Schedule by phone at (510) 528-5760 or by email to permits@albanyca.gov. Inspection information page: https://www.albany, https://www.albany, https://www.albanyca.gov/Departments/Community-Development/Building/Inspections, permits@albanyca.gov, (510) 528-5760. Schedule at least 3 business days in advance. Final inspections may require 5 working days' advance notice..
last verified April 2026
source City of Albany Community Development Department, Building Division ↗
entry id permits/california/alameda/albany
Educational reference. Permit rules and fees change — confirm current requirements directly with City of Albany Community Development Department, Building Division before applying. Jaspector is not legal advice.