On this page 6
§ 02
When a permit is required
Permit triggers and exempt work for Glenwood
Structures over 120 sq. ft. or with electrical or plumbing require a permit.
Structures under 120 sq. ft. with no electrical or plumbing
Like-for-like repairs not affecting structural, electrical, plumbing, or mechanical systems
- Exempt Structures under 120 sq. ft. with no electrical or plumbing
- Exempt Like-for-like repairs not affecting structural, electrical, plumbing, or mechanical systems
Required documents
- Glenwood Town Zoning Permit (approved by town)
- Site plan
- Construction drawings
- Contractor license (if applicable)
- Owner-builder form (if applicable)
- Building code
- Utah statewide 2021 code package as adopted under Utah Code Title 15A.
- Permit validity
- Permits become null if work does not commence within 180 days of issuance.
- Owner-builder
- Owner-builder exemption available for primary residences under Utah Code Section 58-55-305.
- Contractor requirements
- Any work valued at $3,000 or more requires a Utah-licensed contractor unless the owner-builder exemption applies.
§ 03
Application process
Typical processing: Varies; contact Sevier County at (435) 893-0420 for status.
- 01 Contact Glenwood Town Hall at (435) 896-0260 or glenwoodtown@cut.net to confirm zoning requirements and applicable regulations.
- 02 Complete the Glenwood Town Zoning Permit form. Have it reviewed and approved by Glenwood Town (and Planning and Zoning Commission if required).
- 03 Submit the building permit application online via CityInspect with the approved Glenwood Town Zoning Permit attached and all required construction documents.
- 04 Await Sevier County plan review and approval.
- 05 Receive the issued permit. Post permit card visibly on site before work begins.
- 06 Schedule inspections at least 24 hours in advance.
- 07 Obtain final inspection before occupying any new structure.
Typical processing time: Varies; contact Sevier County at (435) 893-0420 for status.
Source: Glenwood Town Hall; Building permits issued by Sevier County Building Department ↗
§ 04
Fee schedule
Glenwood building permit fees
Fee type
Amount
01
Penalty (no permit)
Double permit fee if work begins before permit is obtained
Building permit fees are set by Sevier County. Contact county at (435) 893-0420. Glenwood Town may assess local fees. Contact town hall at (435) 896-0260.
§ 05
Required inspections
Scheduling and sequence
How to schedule
- CityInspect portal (online)
- (435) 893-0420 (phone)
- Scheduling deadline
- At least 24 hours notice required.
Typical sequence: Standard Sevier County inspection sequence applies.
§ 06
Frequently asked
Common questions about Glenwood permits
01 Do I need a building permit in Glenwood, UT? ▸
Structures over 120 sq. ft. or with electrical or plumbing require a permit.
02 How do I apply for a building permit in Glenwood, UT? ▸
To apply for a building permit in Glenwood, UT, follow these steps: 1. Contact Glenwood Town Hall at (435) 896-0260 or glenwoodtown@cut.net to confirm zoning requirements and applicable regulations. 2. Complete the Glenwood Town Zoning Permit form. Have it reviewed and approved by Glenwood Town (and Planning and Zoning Commission if required). 3. Submit the building permit application online via CityInspect with the approved Glenwood Town Zoning Permit attached and all required construction documents. 4. Await Sevier County plan review and approval. 5. Receive the issued permit. Post permit card visibly on site before work begins. 6. Schedule inspections at least 24 hours in advance. 7. Obtain final inspection before occupying any new structure.
03 How long does it take to get a building permit in Glenwood, UT? ▸
Building permit processing times in Glenwood, UT typically run Varies; contact Sevier County at (435) 893-0420 for status.. Timelines can vary based on project complexity and current department workload.
04 What work is exempt from building permits in Glenwood, UT? ▸
Not all construction work requires a permit in Glenwood, UT. The following work is generally exempt: Structures under 120 sq. ft. with no electrical or plumbing; Like-for-like repairs not affecting structural, electrical, plumbing, or mechanical systems. When in doubt, confirm with the local building department before starting work.
05 How do I schedule a building inspection in Glenwood, UT? ▸
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Glenwood, UT via: CityInspect portal, (435) 893-0420. At least 24 hours notice required..
last verified April 2026
source Glenwood Town Hall; Building permits issued by Sevier County Building Department ↗
entry id permits/utah/sevier/glenwood
Educational reference. Permit rules and fees change — confirm current requirements directly with Glenwood Town Hall; Building permits issued by Sevier County Building Department before applying. Jaspector is not legal advice.