jaspector
§ UT Kane County
City building permits

Town of Glendale

How to apply for a building permit in Town of Glendale, Utah. Permit authority, application steps, fees, and inspection requirements.

Last verified
April 2026
On this page 6
§ 01

Permit authority

Glendale Town Corporation -- Planning and Zoning / Building Permit administration

Street address
90 E Center St, Glendale, UT 84729
Coverage
All properties within the incorporated Town of Glendale.
§ 02

When a permit is required

Permit triggers and exempt work for Glendale

Construction and development work regulated by the town's zoning ordinance and adopted building codes; ordinance includes sections on Permit Required, Application, Fee, Development Plan, and Town Council Action.

Note: Default Utah-adopted IRC R105.2 / IBC 105.2 exemptions apply; confirm with town before treating any work as exempt.

Required documents
  • Completed building permit application
  • Site plan
  • Construction drawings
  • Project-specific engineering where applicable
Building code
Town operates under Utah statewide adopted construction codes (2021 IBC, 2021 IRC, and related codes) with any approved local amendments; confirm with town.
Permit validity
Default Utah-adopted 180-day code standard likely applies.
Owner-builder
Not separately described on indexed pages; Utah owner-builder rules apply.
Contractor requirements
Utah DOPL contractor license required.
§ 03

Application process

Application → plan check → issuance → inspection → final

  1. 01
    Review building permit application instructions on the Planning and Zoning page.
  2. 02
    Create an account through the town's online permit system.
  3. 03
    Submit the building permit application with all required project materials.
  4. 04
    Town reviews the application; correction requests will be communicated.
  5. 05
    Pay applicable fees per the current consolidated fee schedule.
  6. 06
    Obtain permit issuance and proceed to construction inspections.

Source: Glendale Town Corporation -- Planning and Zoning / Building Permit administration ↗

§ 04

Fee schedule

Glendale building permit fees

Fee type
Amount
01
Permit fee formula
Town uses fee tables to determine appropriate building permit fees; construction water is billed at $4.00 per 1,000 gallons prior to Certificate of Occupancy; other building permit fees follow the consolidated fee schedule.

Not separately described; confirm current payment method with town office at (435) 648-2341 or clerk@glendaletown.org.

Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.

§ 05

Required inspections

Scheduling and sequence

How to schedule
  • (435) 648-2341 (phone)

Typical sequence: Project-specific; follows Utah-adopted IBC/IRC requirements.

§ 06

Frequently asked

Common questions about Glendale permits

01 Do I need a building permit in Glendale, UT?
Construction and development work regulated by the town's zoning ordinance and adopted building codes; ordinance includes sections on Permit Required, Application, Fee, Development Plan, and Town Council Action.
02 How much does a building permit cost in Glendale, UT?
Building permit fees in Glendale, UT are set by the local building department and vary by project type and valuation. Fees are calculated as: Town uses fee tables to determine appropriate building permit fees; construction water is billed at $4.00 per 1,000 gallons prior to Certificate of Occupancy; other building permit fees follow the consolidated fee schedule..
03 How do I apply for a building permit in Glendale, UT?
To apply for a building permit in Glendale, UT, follow these steps: 1. Review building permit application instructions on the Planning and Zoning page. 2. Create an account through the town's online permit system. 3. Submit the building permit application with all required project materials. 4. Town reviews the application; correction requests will be communicated. 5. Pay applicable fees per the current consolidated fee schedule. 6. Obtain permit issuance and proceed to construction inspections.
04 How do I schedule a building inspection in Glendale, UT?
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Glendale, UT via: (435) 648-2341.

Educational reference. Permit rules and fees change — confirm current requirements directly with Glendale Town Corporation -- Planning and Zoning / Building Permit administration before applying. Jaspector is not legal advice.

§   Adjacent

Other jurisdictions in Kane County.

Same county, different permit office. Click for that jurisdiction's full guide.

All Kane County jurisdictions →