Valley View, TX — 2026 Building Permit Guide

On this page 6

§ 01

Permit authority

City of Valley View / Building and Safety

Street address

308 W. Obuch St., Valley View, TX 76272

Phone

940-726-3740

clerk@cityofvv.com

Coverage

All properties within the incorporated City of Valley View.

Website

Department website

Additional resources

§ 02

When a permit is required

Permit triggers and exempt work for Valley View

Permits are required for driveway, electrical, fence, irrigation, mechanical, plumbing, demolition, commercial, alarm system, 1 and 2 family residential, and accessory structure work.

Note: No single public citywide exempt-work list was found in the reviewed Valley View materials.

Required documents

Electronic plan set
Project and owner data
Survey or plot plan with structure footprint and setbacks
Certified survey before foundation pours

Building code: 2015 codes with section B amendments and the 2014 International Electrical Code. The city contracts with Safebuilt for building code enforcement.
Owner-builder: The residential form allows owner or contractor signature, but no separate owner-builder policy was found.
Contractor requirements: All building contractors pulling permits and conducting work inside the city must be registered in good standing before work starts. First-time license holders must register in person, unless a notarized authorization letter is provided. Contractor registration form requires identification, trade licenses, and insurance.

§ 03

Application process

Application → plan check → issuance → inspection → final

01

Determine the permit type from the city's permits page and download the matching application.
02

Submit the permit form, electronic plans if required, survey or plot plan, and any project-specific materials to City Hall.
03

Ensure all building contractors and subcontractors are registered in good standing with the city before work begins.
04

Pay the applicable fees under the posted permit form and annual fee schedule.
05

Coordinate inspections through City Hall and Safebuilt as applicable.
06

Complete final inspections and any required blower door or duct blaster testing before closeout.

Source: City of Valley View / Building and Safety ↗

§ 04

Fee schedule

Valley View building permit fees

Fee type

Amount

Minimum permit fee

$500 flat fee plus $0.80 per square foot under roof (residential). Minimum fees of $150.00 for driveway permits, electrical permits, and mechanical permits.

Plan check fee

No separate public plan check line was isolated from the reviewed city materials.

Permit fee formula

Mixed. Residential 1 and 2 family permits are calculated at $500 flat fee plus $0.80 per square foot under roof. Various trade permits show flat minimum fees. Contractor registrations are generally $75 each for listed contractor categories except plumbers, which are verified through the state website.

Trade permit fee

$75 for most contractor categories

Permit forms direct payment to the city; no public online permit payment system was identified.

Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.

§ 05

Required inspections

Scheduling and sequence

How to schedule

City Hall (phone)

Inspection hours: 7:30 a.m. - 5:30 p.m. Monday - Thursday; 7:30 a.m. - 11:30 a.m. Friday

Typical sequence: Permit issuance, construction inspections, required pre-pour survey for foundations where applicable, and final inspection. Residential forms also require blower door and duct blaster testing before final.

The city contracts with Safebuilt for building code enforcement.

§ 06

Frequently asked

Common questions about Valley View permits

01 Do I need a building permit in Valley View, TX? ▸

Permits are required for driveway, electrical, fence, irrigation, mechanical, plumbing, demolition, commercial, alarm system, 1 and 2 family residential, and accessory structure work.

02 How much does a building permit cost in Valley View, TX? ▸

Building permit fees in Valley View, TX are set by the local building department and vary by project type and valuation. The minimum permit fee is $500 flat fee plus $0.80 per square foot under roof (residential). Minimum fees of $150.00 for driveway permits, electrical permits, and mechanical permits.. Fees are calculated as: Mixed. Residential 1 and 2 family permits are calculated at $500 flat fee plus $0.80 per square foot under roof. Various trade permits show flat minimum fees. Contractor registrations are generally $75 each for listed contractor categories except plumbers, which are verified through the state website.. Plan check fee: No separate public plan check line was isolated from the reviewed city materials..

03 How do I apply for a building permit in Valley View, TX? ▸

To apply for a building permit in Valley View, TX, follow these steps: 1. Determine the permit type from the city's permits page and download the matching application. 2. Submit the permit form, electronic plans if required, survey or plot plan, and any project-specific materials to City Hall. 3. Ensure all building contractors and subcontractors are registered in good standing with the city before work begins. 4. Pay the applicable fees under the posted permit form and annual fee schedule. 5. Coordinate inspections through City Hall and Safebuilt as applicable. 6. Complete final inspections and any required blower door or duct blaster testing before closeout.

04 How do I schedule a building inspection in Valley View, TX? ▸

Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Valley View, TX via: City Hall.

last verified April 2026 source City of Valley View / Building and Safety ↗ entry id permits/texas/cooke/valley-view

Report a correction

Educational reference. Permit rules and fees change — confirm current requirements directly with City of Valley View / Building and Safety before applying. Jaspector is not legal advice.

City of Valley View

Other jurisdictions in Cooke County.