jaspector
City building permits

City of Archer City

How to apply for a building permit in City of Archer City, Texas. Permit authority, application steps, fees, and inspection requirements.

Last verified
April 2026
On this page 6
§ 01

Permit authority

City Secretary / permitting officer / building inspector

Street address
118 S. Sycamore Street, Archer City, TX 76351
Coverage
All properties within the incorporated City of Archer City.
Additional resources
§ 02

When a permit is required

Permit triggers and exempt work for Archer City

All persons desiring a building, electrical, plumbing, mechanical, or foundation permit within the city must apply. No placement, construction, remodeling, or refurbishment may begin before permit issuance.

Note: No public exempt-work list was identified. Homeowner registration exemptions do not remove the need for permits.

Required documents
  • Property survey
  • Site plan
  • Building plan
  • Foundation plan
  • Lot-plat compliance verification
  • Trade licenses as applicable
  • Contractor driver license copies
  • Proof of insurance as applicable
Building code
International Building Code 2021; International Existing Building Code 2021; International Residential Code 2021; International Electrical Code 2020 (NFPA 70); International Fire Code 2021; International Plumbing Code 2021; International Mechanical Code 2021; International Fuel Gas Code 2021; International Energy Conservation Code 2021
Permit validity
Permits are valid for 1 year from issuance. Renewal or extension may not exceed 6 months, and the extension fee is one-half of the original permit fee.
Owner-builder
A homeowner living in the structure may perform alteration or repair work without contractor registration, but permits and all other code requirements still apply.
Contractor requirements
General, plumbing, irrigation, mechanical, and electrical contractors must register with the city and maintain an occupational license.
§ 03

Application process

Application → plan check → issuance → inspection → final

  1. 01
    Register each contractor with the city and maintain the required occupational license before permit issuance.
  2. 02
    File the permit application with the city secretary.
  3. 03
    Submit one copy each of the property survey, site plan, building plan, and foundation plan, plus any additional copies or supporting items requested by the city secretary or permitting officer.
  4. 04
    Provide proof that the lot complies with city platting requirements and submit trade-license and insurance information as applicable.
  5. 05
    After permitting-officer approval and fee payment, the city secretary issues the permit.
  6. 06
    Obtain required inspections and any certificate of occupancy before use or occupancy.

Source: City Secretary / permitting officer / building inspector ↗

§ 04

Fee schedule

Archer City building permit fees

Fee type
Amount
01
Minimum permit fee
Contractor occupational licensing minimum $50.00 annually; electrical registration $10.00
02
Permit fee formula
Flat registration fees per permit type; full building permit fee schedule on file in city secretary's office
03
Penalty (no permit)
Work started before permit issuance is subject to 100 percent of the usual permit fee in addition to the required permit fee.

Permit fees must be paid before issuance or amendment.

Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.

§ 05

Required inspections

Scheduling and sequence

How to schedule
  • (940) 574-4570 (phone)

Typical sequence: The building inspector has authority over building, plumbing, mechanical, electrical, and foundation inspections. A certificate of occupancy is required before use or occupancy where applicable.

§ 06

Frequently asked

Common questions about Archer City permits

01 Do I need a building permit in Archer City, TX?
All persons desiring a building, electrical, plumbing, mechanical, or foundation permit within the city must apply. No placement, construction, remodeling, or refurbishment may begin before permit issuance.
02 How much does a building permit cost in Archer City, TX?
Building permit fees in Archer City, TX are set by the local building department and vary by project type and valuation. The minimum permit fee is Contractor occupational licensing minimum $50.00 annually; electrical registration $10.00. Fees are calculated as: Flat registration fees per permit type; full building permit fee schedule on file in city secretary's office.
03 How do I apply for a building permit in Archer City, TX?
To apply for a building permit in Archer City, TX, follow these steps: 1. Register each contractor with the city and maintain the required occupational license before permit issuance. 2. File the permit application with the city secretary. 3. Submit one copy each of the property survey, site plan, building plan, and foundation plan, plus any additional copies or supporting items requested by the city secretary or permitting officer. 4. Provide proof that the lot complies with city platting requirements and submit trade-license and insurance information as applicable. 5. After permitting-officer approval and fee payment, the city secretary issues the permit. 6. Obtain required inspections and any certificate of occupancy before use or occupancy.
04 How do I schedule a building inspection in Archer City, TX?
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Archer City, TX via: (940) 574-4570.
last verified April 2026 source City Secretary / permitting officer / building inspector ↗ entry id permits/texas/archer/archer-city

Educational reference. Permit rules and fees change — confirm current requirements directly with City Secretary / permitting officer / building inspector before applying. Jaspector is not legal advice.

§   Adjacent

Other jurisdictions in Archer County.

Same county, different permit office. Click for that jurisdiction's full guide.

All Archer County jurisdictions →