jaspector
City building permits

City of Tucker

How to apply for a building permit in City of Tucker, Georgia. Permit authority, application steps, fees, and inspection requirements.

Last verified
April 2026
On this page 6
§ 01

Permit authority

City of Tucker Community Development, Building and Permitting Division

Street address
1975 Lakeside Parkway, Suite 350, Tucker, GA 30084
Coverage
Covers properties inside the City of Tucker. Tucker now handles its own fire marshal plan review and inspections for commercial and multifamily life safety matters.
Online portal
City of Tucker Services Portal
City of Tucker services portal
§ 02

When a permit is required

Permit triggers and exempt work for Tucker

Tucker states that all building and trade permits are processed through Building and Permitting and provides a permit-need section on its official page.

Note: Tucker does not publish a full public exemption list on the current permit page. Confirm fence, deck, shed, reroof, and similar small-scope items directly with Building and Permitting before starting.

Required documents
  • Permit application
  • Plans
  • Contractor credentials
  • Homeowner affidavit if owner-builder
  • Permit agent affidavit if applicable
  • Fire marshal materials where applicable
Building code
Tucker enforces International and State Building, Mechanical, Plumbing, and Electrical Codes, which in practice means the Georgia State Minimum Standard Codes as adopted by DCA and implemented by the city.
Permit validity
City ordinance states fees must be paid before a permit is valid. Confirm expiration conditions on the permit card or code section provided with issuance.
Owner-builder
Homeowner Affidavit is required for owner-builder filing.
Contractor requirements
Tucker collects contractor credentials and requires state-licensed contractors where required by Georgia law.
§ 03

Application process

Typical processing: No general public turnaround estimate is posted on the current landing page.

  1. 01
    Confirm permit need from the Building and Permitting page and pull the correct application packet or affidavit.
  2. 02
    Submit building and trade permits electronically to permits@tuckerga.gov with plans and supporting documents.
  3. 03
    City staff reviews plans, collects fees, and issues the permit.
  4. 04
    Post permit documents and complete work.
  5. 05
    Request inspections through the city inspection service.
  6. 06
    Complete fire marshal review/inspection where commercial or multifamily life safety scope requires it.
  7. 07
    Obtain final approval and CO/CC as applicable.

Typical processing time: No general public turnaround estimate is posted on the current landing page.

Source: City of Tucker Community Development, Building and Permitting Division ↗

§ 04

Fee schedule

Tucker building permit fees

Fee type
Amount
01
Minimum permit fee
$50 administrative fee plus a minimum $50 plan review fee; trade permits have a $50 base fee
02
Plan check fee
10% of calculated permit fee, minimum $50
03
Permit fee formula
New/addition residential permits use ICC Building Valuation Data multiplied by 0.0065 plus administrative and plan review fees. Residential alterations use cost of construction multiplied by 0.0065 plus the same admin and plan review fees.

All fees are due at permit issuance.

Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.

§ 05

Required inspections

Scheduling and sequence

How to schedule

Typical sequence: Foundation/site as applicable; Rough framing and rough trades; Fire marshal milestones where applicable; Final building/trade inspections; CO/CC.

§ 06

Frequently asked

Common questions about Tucker permits

01 Do I need a building permit in Tucker, GA?
Tucker states that all building and trade permits are processed through Building and Permitting and provides a permit-need section on its official page.
02 How much does a building permit cost in Tucker, GA?
Building permit fees in Tucker, GA are set by the local building department and vary by project type and valuation. The minimum permit fee is $50 administrative fee plus a minimum $50 plan review fee; trade permits have a $50 base fee. Fees are calculated as: New/addition residential permits use ICC Building Valuation Data multiplied by 0.0065 plus administrative and plan review fees. Residential alterations use cost of construction multiplied by 0.0065 plus the same admin and plan review fees.. Plan check fee: 10% of calculated permit fee, minimum $50.
03 How do I apply for a building permit in Tucker, GA?
To apply for a building permit in Tucker, GA, follow these steps: 1. Confirm permit need from the Building and Permitting page and pull the correct application packet or affidavit. 2. Submit building and trade permits electronically to permits@tuckerga.gov with plans and supporting documents. 3. City staff reviews plans, collects fees, and issues the permit. 4. Post permit documents and complete work. 5. Request inspections through the city inspection service. 6. Complete fire marshal review/inspection where commercial or multifamily life safety scope requires it. 7. Obtain final approval and CO/CC as applicable.
04 How long does it take to get a building permit in Tucker, GA?
Building permit processing times in Tucker, GA typically run No general public turnaround estimate is posted on the current landing page.. Timelines can vary based on project complexity and current department workload.
05 How do I schedule a building inspection in Tucker, GA?
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Tucker, GA via: City inspection request page.
last verified April 2026 source City of Tucker Community Development, Building and Permitting Division ↗ entry id permits/georgia/dekalb/tucker

Educational reference. Permit rules and fees change — confirm current requirements directly with City of Tucker Community Development, Building and Permitting Division before applying. Jaspector is not legal advice.