jaspector
City building permits

City of Victorville

How to apply for a building permit in City of Victorville, California. Permit authority, application steps, fees, and inspection requirements.

Last verified
April 2026
On this page 6
§ 01

Permit authority

City of Victorville Development Department, Building Division / Permit Center

Street address
14343 Civic Drive, PO Box 5001, Victorville, CA 92393-5001
Coverage
Applies within incorporated City of Victorville limits. Projects outside city limits in unincorporated San Bernardino County are handled by San Bernardino County Land Use Services, not the City of Victorville.
Online portal
Tyler EnerGov Citizen Self Service Portal
Tyler EnerGov Citizen Self Service Portal
§ 02

When a permit is required

Permit triggers and exempt work for Victorville

The City states that permitted projects generally follow the Permit Center process and publishes a non-exhaustive list of common residential work requiring permits, including additions or alterations to mechanical, plumbing, or electrical systems; decks/balconies over 30 inches high; demolition; certain fences and retaining walls; garage conversions; gazebos over 120 square feet; guest houses; new HVAC units; mobile home carports/awnings and set-downs; new garages or carports; attached patio covers or patio covers over 120 square feet; patio enclosures; re-roofing over 1 square; slabs with footings; photovoltaic systems; sheds over 120 square feet; pools/spas 18 inches deep or deeper; water heater replacements; and service upgrades/relocations. If work is not listed, the City instructs applicants to contact the Building Division to confirm requirements.

Residential on-site flat concrete work such as sidewalks or driveways does not require a building permit, though curb cutting and driveway approaches may require separate Engineering Division review
Small sheds at 120 square feet or less are implied exempt because the City lists storage sheds over 120 square feet as requiring permits
Small gazebos at 120 square feet or less are implied exempt because the City lists gazebos over 120 square feet as requiring permits
Detached patio covers at 120 square feet or less are implied exempt because the City lists attached patio covers or patio covers over 120 square feet as requiring permits
Fences at or below 3 feet in height, and front-yard fences at or below 18 inches, are implied exempt because the City lists larger fences as requiring permits
Retaining or garden walls at or below 18 inches in height, or at or below 30 inches where no footing is required, are implied exempt because the City lists taller walls as requiring permits
Pools or spas less than 18 inches deep are implied exempt because the City lists pools/spas 18 inches deep or deeper as requiring permits
  • Exempt Residential on-site flat concrete work such as sidewalks or driveways does not require a building permit, though curb cutting and driveway approaches may require separate Engineering Division review
  • Exempt Small sheds at 120 square feet or less are implied exempt because the City lists storage sheds over 120 square feet as requiring permits
  • Exempt Small gazebos at 120 square feet or less are implied exempt because the City lists gazebos over 120 square feet as requiring permits
  • Exempt Detached patio covers at 120 square feet or less are implied exempt because the City lists attached patio covers or patio covers over 120 square feet as requiring permits
  • Exempt Fences at or below 3 feet in height, and front-yard fences at or below 18 inches, are implied exempt because the City lists larger fences as requiring permits
  • Exempt Retaining or garden walls at or below 18 inches in height, or at or below 30 inches where no footing is required, are implied exempt because the City lists taller walls as requiring permits
  • Exempt Pools or spas less than 18 inches deep are implied exempt because the City lists pools/spas 18 inches deep or deeper as requiring permits

Note: The City says its published permit-required list is not comprehensive. Even if a building permit is not required, separate planning, zoning, fire, engineering, utility, school district, air district, or right-of-way approvals may still apply depending on the project.

Required documents
  • Digital plans and supporting documents uploaded through the portal
  • project-specific submittal requirements are on the Fees & Forms page. The City also publishes forms including contractor declaration, property owner declaration, special inspection authorization, construction waste management plan, sewer fee calculation request, and other project-specific supplements
Building code
The City's Building Codes page lists the 2025 California Building Code, 2025 California Residential Code, 2025 California Mechanical Code, 2025 California Electrical Code, 2025 California Plumbing Code, and 2025 California Green Code. The City's building code handout also references 2025 T-24 and the California Wildland-Urban Interface Code.
Permit validity
Victorville's current permittee authorization forms state a permit becomes void if no inspection is requested within 12 months from issuance, or if after the first inspection the work is suspended or abandoned for 180 days. The City also provides a Plan Review or Permit Extension form; the extension form references one-time extensions for up to 180 days for plan review, and permit expiration rules under Victorville Development Code sections 16-5.01.100 and 16-5.01.110.
Owner-builder
The City requires an Owner-Builder Declaration if the applicant is claiming exemption from contractor licensure. The form cites Business and Professions Code sections 7031.5 and 7044 and requires the owner to state the exemption basis. It also warns that, except for a personal residence occupied for at least one year before completion, an owner-builder generally cannot legally sell a structure not built entirely by licensed contractors.
Contractor requirements
The City's contractor declaration form requires the applicant to affirm under penalty of perjury that the contractor is licensed under California Business and Professions Code chapter 9, that the license is in full force and effect, and to provide license class and number. The form also requires workers' compensation disclosure.
§ 03

Application process

Typical processing: No standard public turnaround is posted on the cited Victorville permit pages; plans are reviewed in the order received.

  1. 01
    Prepare plans to current City of Victorville and California code standards.
  2. 02
    Check the City's Fees & Forms page for project-specific submittal requirements, standard details, and fee schedules.
  3. 03
    Create or log into the Citizen Self Service Portal and apply for the appropriate permit online.
  4. 04
    Upload digital plans and documents; the City states it accepts digital submittals for plan review.
  5. 05
    Pay the initial plan review fee once assessed.
  6. 06
    Respond to plan review comments if revisions are required.
  7. 07
    After approval, pay remaining development and permit fees and wait for permit issuance.
  8. 08
    Build according to the approved plans, then schedule required inspections through the portal.
  9. 09
    Obtain final approval from the Development Department.

Typical processing time: No standard public turnaround is posted on the cited Victorville permit pages; plans are reviewed in the order received.

Source: City of Victorville Development Department, Building Division / Permit Center ↗

§ 04

Fee schedule

Victorville building permit fees

Fee type
Amount
01
Minimum permit fee
No universal minimum fee is stated on the main fee schedule page. In the City's 2026 stand-alone permit fee chart, the lowest listed stand-alone permit fee is $74 for electrical circuits.
02
Plan check fee
Yes. The City states an initial fee assessment is made to determine the applicable plan review fee, and residential fee kits list separate plan check amounts.
03
Permit fee formula
Mixed. Many standard permits use flat fees from the stand-alone chart. New residential construction and additions use square-foot-based plan review and inspection fee tables. Additional fees may include technology fees, SMIP seismic fees, green building fees, sewer fees, impact fees, drainage fees, school fees, and location-based bridge fees.
04
Reinspection fee
The public inspection page says failed inspections are emailed with reasons, but it does not publish a general reinspection fee there. Project-specific engineering notes and some permit documents indicate reinspection fees may apply. Additional penalty fees are not clearly summarized on the main building permit pages reviewed.

The City instructs applicants to pay development and permit fees after plan approval and before issuance through the online portal. Exact fees are calculated after plan submittal/review; published fee kits are estimates only.

Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.

§ 05

Required inspections

Scheduling and sequence

How to schedule
Inspection hours
Monday-Friday.
Time windows
a.m. window 8:00 a.m.-12:00 p.m. p.m. window 1:00 p.m.-5:00 p.m., except Friday p.m. inspections end at 4:00 p.m.

Typical sequence: The City does not publish one universal sequence on the cited page. Based on the permit and inspection process it uses, the sequence depends on scope and typically follows the approved permit stages for the job; for standard building work this generally means applicable foundation/slab or underground inspections, framing/rough trade inspections, and final inspection. This sequence is an inference from the City's permit/inspection framework rather than a step list published on one Victorville page.

Source: City of Victorville Development Department, Building Division / Permit Center ↗

§ 06

Frequently asked

Common questions about Victorville permits

01 Do I need a building permit in Victorville, CA?
The City states that permitted projects generally follow the Permit Center process and publishes a non-exhaustive list of common residential work requiring permits, including additions or alterations to mechanical, plumbing, or electrical systems; decks/balconies over 30 inches high; demolition; certain fences and retaining walls; garage conversions; gazebos over 120 square feet; guest houses; new HVAC units; mobile home carports/awnings and set-downs; new garages or carports; attached patio covers or patio covers over 120 square feet; patio enclosures; re-roofing over 1 square; slabs with footings; photovoltaic systems; sheds over 120 square feet; pools/spas 18 inches deep or deeper; water heater replacements; and service upgrades/relocations. If work is not listed, the City instructs applicants to contact the Building Division to confirm requirements.
02 How much does a building permit cost in Victorville, CA?
Building permit fees in Victorville, CA are set by the local building department and vary by project type and valuation. The minimum permit fee is No universal minimum fee is stated on the main fee schedule page. In the City's 2026 stand-alone permit fee chart, the lowest listed stand-alone permit fee is $74 for electrical circuits.. Fees are calculated as: Mixed. Many standard permits use flat fees from the stand-alone chart. New residential construction and additions use square-foot-based plan review and inspection fee tables. Additional fees may include technology fees, SMIP seismic fees, green building fees, sewer fees, impact fees, drainage fees, school fees, and location-based bridge fees.. Plan check fee: Yes. The City states an initial fee assessment is made to determine the applicable plan review fee, and residential fee kits list separate plan check amounts..
03 How do I apply for a building permit in Victorville, CA?
To apply for a building permit in Victorville, CA, follow these steps: 1. Prepare plans to current City of Victorville and California code standards. 2. Check the City's Fees & Forms page for project-specific submittal requirements, standard details, and fee schedules. 3. Create or log into the Citizen Self Service Portal and apply for the appropriate permit online. 4. Upload digital plans and documents; the City states it accepts digital submittals for plan review. 5. Pay the initial plan review fee once assessed. 6. Respond to plan review comments if revisions are required. 7. After approval, pay remaining development and permit fees and wait for permit issuance. 8. Build according to the approved plans, then schedule required inspections through the portal. 9. Obtain final approval from the Development Department.
04 How long does it take to get a building permit in Victorville, CA?
Building permit processing times in Victorville, CA typically run No standard public turnaround is posted on the cited Victorville permit pages; plans are reviewed in the order received.. Timelines can vary based on project complexity and current department workload.
05 What work is exempt from building permits in Victorville, CA?
Not all construction work requires a permit in Victorville, CA. The following work is generally exempt: Residential on-site flat concrete work such as sidewalks or driveways does not require a building permit, though curb cutting and driveway approaches may require separate Engineering Division review; Small sheds at 120 square feet or less are implied exempt because the City lists storage sheds over 120 square feet as requiring permits; Small gazebos at 120 square feet or less are implied exempt because the City lists gazebos over 120 square feet as requiring permits; Detached patio covers at 120 square feet or less are implied exempt because the City lists attached patio covers or patio covers over 120 square feet as requiring permits; Fences at or below 3 feet in height, and front-yard fences at or below 18 inches, are implied exempt because the City lists larger fences as requiring permits; Retaining or garden walls at or below 18 inches in height, or at or below 30 inches where no footing is required, are implied exempt because the City lists taller walls as requiring permits; Pools or spas less than 18 inches deep are implied exempt because the City lists pools/spas 18 inches deep or deeper as requiring permits. Note: The City says its published permit-required list is not comprehensive. Even if a building permit is not required, separate planning, zoning, fire, engineering, utility, school district, air district, or right-of-way approvals may still apply depending on the project. When in doubt, confirm with the local building department before starting work.
06 How do I schedule a building inspection in Victorville, CA?
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Victorville, CA via: Schedule online through the Citizen Self Service Portal, (760) 955-5100.
last verified April 2026 source City of Victorville Development Department, Building Division / Permit Center ↗ entry id permits/california/san-bernardino/victorville

Educational reference. Permit rules and fees change — confirm current requirements directly with City of Victorville Development Department, Building Division / Permit Center before applying. Jaspector is not legal advice.