jaspector
City building permits

City of Clarksville City

How to apply for a building permit in City of Clarksville City, Texas. Permit authority, application steps, fees, and inspection requirements.

Last verified
April 2026
On this page 4
§ 01

Permit authority

City of Clarksville City

Street address
PO Box 1111, White Oak, TX 75693-6111
Coverage
Clarksville City spans Gregg and Upshur Counties. This section addresses only the portion lying in Upshur County, and parcel-level city-limit verification matters.
Additional resources
§ 02

When a permit is required

Permit triggers and exempt work for Clarksville City

A city code index entry confirms a permit-required section, but the full current text and scope of the city's general building permit triggers were not publicly verified from accessible sources.

Building code
No current public code-adoption source was clearly verified from accessible sources.
Contractor requirements
No public city-specific contractor program was found in reviewed sources. State trade licensing rules may still apply.
§ 03

Application process

Application → plan check → issuance → inspection → final

  1. 01
    The publicly accessible city code index confirms a Section 4.04.004 captioned 'Permit required; application; issuance.'
  2. 02
    The reviewed public sources did not expose a current city permit application form, portal, or a fuller public submittal checklist.
  3. 03
    Because no public application page was identified, applicants should contact the city directly before assuming a permit is or is not required for a specific project in the Upshur County portion of the city.
  4. 04
    Confirm parcel location carefully because Clarksville City is a cross-county municipality.

Source: City of Clarksville City ↗

§ 04

Frequently asked

Common questions about Clarksville City permits

01 Do I need a building permit in Clarksville City, TX?
A city code index entry confirms a permit-required section, but the full current text and scope of the city's general building permit triggers were not publicly verified from accessible sources.
02 How do I apply for a building permit in Clarksville City, TX?
To apply for a building permit in Clarksville City, TX, follow these steps: 1. The publicly accessible city code index confirms a Section 4.04.004 captioned 'Permit required; application; issuance.' 2. The reviewed public sources did not expose a current city permit application form, portal, or a fuller public submittal checklist. 3. Because no public application page was identified, applicants should contact the city directly before assuming a permit is or is not required for a specific project in the Upshur County portion of the city. 4. Confirm parcel location carefully because Clarksville City is a cross-county municipality.
last verified April 2026 source City of Clarksville City ↗ entry id permits/texas/upshur/clarksville-city

Educational reference. Permit rules and fees change — confirm current requirements directly with City of Clarksville City before applying. Jaspector is not legal advice.

§   Adjacent

Other jurisdictions in Upshur County.

Same county, different permit office. Click for that jurisdiction's full guide.

All Upshur County jurisdictions →