jaspector
City building permits

Town of Taylorsville

How to apply for a building permit in Town of Taylorsville, North Carolina. Permit authority, application steps, fees, and inspection requirements.

Min. permit fee
$50
Last verified
April 2026
On this page 6
§ 01

Permit authority

Town of Taylorsville Planning and Development, with zoning enforcement contracted through Alexander County

Street address
Town Hall, 67 Main Avenue Drive, Taylorsville, NC 28681
Coverage
within Taylorsville corporate limits and its extraterritorial jurisdiction, where the town code and county zoning arrangement apply
§ 02

When a permit is required

Permit triggers and exempt work for Taylorsville

The town zoning permit form applies to new construction, remodeling or additions, demolition, manufactured homes, modular homes, accessory uses, septic tanks, plumbing, electrical, and signs.

Required documents
  • Owner/applicant information
  • Contractor information
  • Tax map
  • Zoning district
  • Use
  • Work description
  • Construction type
  • Estimated cost
  • Size
  • Acreage
  • Setback requirements
  • Floodplain and watershed status
  • Utility service information
Building code
Town documents route building work through county inspections under the statewide North Carolina code.
Contractor requirements
County building-inspections forms require licensed general contractor status where applicable; user-supplied NC context applies statewide for projects $40,000+.
§ 03

Application process

Application → plan check → issuance → inspection → final

  1. 01
    Determine whether the project is inside Taylorsville city limits or ETJ.
  2. 02
    Submit the Taylorsville zoning permit application or work with county planning staff.
  3. 03
    For projects requiring building inspections, coordinate with Alexander County Building Inspections after zoning approval.
  4. 04
    Pay the applicable town fee and any county permit fees, then proceed through inspections.

Source: Town of Taylorsville Planning and Development, with zoning enforcement contracted through Alexander County ↗

§ 04

Fee schedule

Taylorsville building permit fees

Fee type
Amount
01
Minimum permit fee
$50
02
Permit fee formula
New single family $200; new multi-family $200 + $50 per unit; additions $100; accessory $100; non-residential up to 5,000 sq ft $250; non-residential 5,001-10,000 sq ft $350 + $5 per 1,000 sq ft; non-residential greater than 10,001 sq ft $500 + $5 per 1,000 sq ft
§ 05

Required inspections

Scheduling and sequence

Inspection hours
County inspections are normally scheduled for the next business day after request.

Typical sequence: Town zoning permit first, then county building permit and inspections where applicable.

Source: Town of Taylorsville Planning and Development, with zoning enforcement contracted through Alexander County ↗

§ 06

Frequently asked

Common questions about Taylorsville permits

01 Do I need a building permit in Taylorsville, NC?
The town zoning permit form applies to new construction, remodeling or additions, demolition, manufactured homes, modular homes, accessory uses, septic tanks, plumbing, electrical, and signs.
02 How much does a building permit cost in Taylorsville, NC?
Building permit fees in Taylorsville, NC are set by the local building department and vary by project type and valuation. The minimum permit fee is $50. Fees are calculated as: New single family $200; new multi-family $200 + $50 per unit; additions $100; accessory $100; non-residential up to 5,000 sq ft $250; non-residential 5,001-10,000 sq ft $350 + $5 per 1,000 sq ft; non-residential greater than 10,001 sq ft $500 + $5 per 1,000 sq ft.
03 How do I apply for a building permit in Taylorsville, NC?
To apply for a building permit in Taylorsville, NC, follow these steps: 1. Determine whether the project is inside Taylorsville city limits or ETJ. 2. Submit the Taylorsville zoning permit application or work with county planning staff. 3. For projects requiring building inspections, coordinate with Alexander County Building Inspections after zoning approval. 4. Pay the applicable town fee and any county permit fees, then proceed through inspections.

Educational reference. Permit rules and fees change — confirm current requirements directly with Town of Taylorsville Planning and Development, with zoning enforcement contracted through Alexander County before applying. Jaspector is not legal advice.

§   Adjacent

Other jurisdictions in Alexander County.

Same county, different permit office. Click for that jurisdiction's full guide.

All Alexander County jurisdictions →