jaspector
City building permits

Ellenton

How to apply for a building permit in Ellenton, Georgia. Permit authority, application steps, fees, and inspection requirements.

Last verified
April 2026
On this page 6
§ 01

Permit authority

Colquitt County Compliance Office

Street address
Colquitt County Courthouse Annex, 101 East Central Ave., Office 109, Moultrie, GA 31768
Coverage
The 2018 Colquitt County SDS states the county covers all cities except Moultrie for building inspection and code enforcement, and the county Compliance page says it provides inspection of construction for the small municipalities of Colquitt County. No separate official Ellenton permit page was located in the reviewed public record.
§ 02

When a permit is required

Permit triggers and exempt work for Ellenton

County materials show permits for construction, additions and renovations, trade work, demolition, reroofing, relocations, driveway permits, and other listed work.

Note: No public Ellenton-specific exempt-work list was found. No public county exempt-work list was found on the reviewed Compliance materials.

Required documents
  • Completed permit application
  • Plans
  • Septic and water approval if applicable
  • Driveway permit if applicable
  • Contractor and subcontractor information
  • Homeowner affidavit and deed if owner-occupant is the applicant
Building code
Georgia State Minimum Standard Construction Codes apply statewide; the county application also references the codes adopted by Georgia and Colquitt County.
Permit validity
The county form has an expiration field, but no public county rule stating the permit life was located.
Owner-builder
Notarized owner affidavit and deed are required; county states it will issue permits only to a state licensed contractor or to the owner-occupant of a residential property.
Contractor requirements
Georgia contractor licensing requirements apply statewide.
§ 03

Application process

Application → plan check → issuance → inspection → final

  1. 01
    Confirm the property is inside Ellenton city limits and confirm county Compliance is the permit intake point.
  2. 02
    Download the county Construction Permit Application and owner affidavit if needed.
  3. 03
    Assemble plans and other required support materials shown on the county form, including septic and water approval if applicable and driveway permit if applicable.
  4. 04
    Submit the application package to the Compliance Office and pay the fee schedule.
  5. 05
    Schedule inspections with county Compliance and obtain final approval before occupancy or service connection as applicable.

Source: Colquitt County Compliance Office ↗

§ 04

Fee schedule

Ellenton building permit fees

Fee type
Amount
01
Plan check fee
No separate public plan review fee identified
02
Permit fee formula
Square-foot based for building permits and flat fees for many trade and specialty permits
03
Trade permit fee
$100 residential and $250 commercial
04
Penalty (no permit)
Permit fees are doubled if obtained after work starts; relocation without permit carries a posted penalty

No public online permit-payment portal identified

Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.

§ 05

Required inspections

Scheduling and sequence

How to schedule
  • Contact the Colquitt County Compliance Office by phone or email (phone)
Inspection hours
Monday through Friday, 8:00 a.m. to 5:00 p.m.

Typical sequence: No detailed public county sequence was located

§ 06

Frequently asked

Common questions about Ellenton permits

01 Do I need a building permit in Ellenton, GA?
County materials show permits for construction, additions and renovations, trade work, demolition, reroofing, relocations, driveway permits, and other listed work.
02 How much does a building permit cost in Ellenton, GA?
Building permit fees in Ellenton, GA are set by the local building department and vary by project type and valuation. Fees are calculated as: Square-foot based for building permits and flat fees for many trade and specialty permits. Plan check fee: No separate public plan review fee identified.
03 How do I apply for a building permit in Ellenton, GA?
To apply for a building permit in Ellenton, GA, follow these steps: 1. Confirm the property is inside Ellenton city limits and confirm county Compliance is the permit intake point. 2. Download the county Construction Permit Application and owner affidavit if needed. 3. Assemble plans and other required support materials shown on the county form, including septic and water approval if applicable and driveway permit if applicable. 4. Submit the application package to the Compliance Office and pay the fee schedule. 5. Schedule inspections with county Compliance and obtain final approval before occupancy or service connection as applicable.
04 How do I schedule a building inspection in Ellenton, GA?
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Ellenton, GA via: Contact the Colquitt County Compliance Office by phone or email.
last verified April 2026 source Colquitt County Compliance Office ↗ entry id permits/georgia/colquitt/ellenton

Educational reference. Permit rules and fees change — confirm current requirements directly with Colquitt County Compliance Office before applying. Jaspector is not legal advice.

§   Adjacent

Other jurisdictions in Colquitt County.

Same county, different permit office. Click for that jurisdiction's full guide.

All Colquitt County jurisdictions →