jaspector
City building permits

Town of Bloom

How to apply for a building permit in Town of Bloom, Wisconsin. Permit authority, application steps, fees, and inspection requirements.

Code adoption
Wisconsin UDC for applicable dwellings
Last verified
April 2026
On this page 5
§ 01

Permit authority

Richland County Zoning and Sanitation Department for residential land use; local UDC inspector for building permits

Street address
county office at 181 W Seminary Street, Room 100, Richland Center, WI 53581 for county permits
Coverage
not zoned under Richland County Zoning, but residential land use permits are required from the county
Online portal
Permit portal
§ 02

When a permit is required

Permit triggers and exempt work for Bloom

residential land use permits are required from the county

Required documents
  • county land use application and site drawing
Building code
Wisconsin UDC for applicable dwellings
§ 03

Application process

Application → plan check → issuance → inspection → final

  1. 01
    Confirm whether the work is residential land use controlled by the county.
  2. 02
    Obtain driveway, sanitary, and county land use approvals as needed.
  3. 03
    Obtain UDC permit through the local inspector if new dwelling or addition.

Source: Richland County Zoning and Sanitation Department for residential land use; local UDC inspector for building permits ↗

§ 04

Fee schedule

Bloom building permit fees

Fee type
Amount
01
Minimum permit fee
county residential land use minimums
02
Permit fee formula
county fee schedule applies

Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.

§ 05

Frequently asked

Common questions about Bloom permits

01 Do I need a building permit in Bloom, WI?
residential land use permits are required from the county
02 How much does a building permit cost in Bloom, WI?
Building permit fees in Bloom, WI are set by the local building department and vary by project type and valuation. The minimum permit fee is county residential land use minimums. Fees are calculated as: county fee schedule applies.
03 How do I apply for a building permit in Bloom, WI?
To apply for a building permit in Bloom, WI, follow these steps: 1. Confirm whether the work is residential land use controlled by the county. 2. Obtain driveway, sanitary, and county land use approvals as needed. 3. Obtain UDC permit through the local inspector if new dwelling or addition.

Educational reference. Permit rules and fees change — confirm current requirements directly with Richland County Zoning and Sanitation Department for residential land use; local UDC inspector for building permits before applying. Jaspector is not legal advice.