jaspector
§ WI Price County
City building permits

City of Park Falls

How to apply for a building permit in City of Park Falls, Wisconsin. Permit authority, application steps, fees, and inspection requirements.

Last verified
April 2026
On this page 5
§ 01

Permit authority

City of Park Falls Code Compliance / City Zoning Administrator.

Street address
410 Division St / P.O. Box 146, Park Falls, WI 54552
Coverage
City of Park Falls only.
§ 02

When a permit is required

Permit triggers and exempt work for Park Falls

city application covers residential or commercial / industrial construction, raze, driveway, fence, siding replacement, remodeling, additions, and accessory buildings.

Required documents
  • completed application, estimated cost, work description, parcel and site information, and code compliance acknowledgement. Plans can be requested.
Owner-builder
application allows owner, contractor, or other applicant. No separate owner-builder policy was found.
Contractor requirements
no local contractor licensing rule was found in the public sources reviewed.
§ 03

Fee schedule

Park Falls building permit fees

Fee type
Amount
01
Minimum permit fee
2026 schedule shows $25 for remodel / alterations / roofs, $25 per building for raze / demolition, $30 for additions and accessory structures under 300 sq ft, $50 for additions and accessory structures over 300 sq ft, and $75 for new residential 1 and 2 family and commercial construction.
02
Permit fee formula
2026 fee schedule states the building permit fee includes electrical, plumbing, HVAC, and driveway permits for new construction. It also states the fee does not include state inspection fees or erosion control permits.

Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.

§ 04

Required inspections

Scheduling and sequence

fee schedule notes that some work is subject to state inspection fees, but no city reinspection process was published in the reviewed documents.

§ 05

Frequently asked

Common questions about Park Falls permits

01 Do I need a building permit in Park Falls, WI?
city application covers residential or commercial / industrial construction, raze, driveway, fence, siding replacement, remodeling, additions, and accessory buildings.
02 How much does a building permit cost in Park Falls, WI?
Building permit fees in Park Falls, WI are set by the local building department and vary by project type and valuation. The minimum permit fee is 2026 schedule shows $25 for remodel / alterations / roofs, $25 per building for raze / demolition, $30 for additions and accessory structures under 300 sq ft, $50 for additions and accessory structures over 300 sq ft, and $75 for new residential 1 and 2 family and commercial construction.. Fees are calculated as: 2026 fee schedule states the building permit fee includes electrical, plumbing, HVAC, and driveway permits for new construction. It also states the fee does not include state inspection fees or erosion control permits..
last verified April 2026 source City of Park Falls Code Compliance / City Zoning Administrator. ↗ entry id permits/wisconsin/price/park-falls

Educational reference. Permit rules and fees change — confirm current requirements directly with City of Park Falls Code Compliance / City Zoning Administrator. before applying. Jaspector is not legal advice.

§   Adjacent

Other jurisdictions in Price County.

Same county, different permit office. Click for that jurisdiction's full guide.

All Price County jurisdictions →