jaspector
§ TX Smith County
City building permits

City of Bullard

How to apply for a building permit in City of Bullard, Texas. Permit authority, application steps, fees, and inspection requirements.

Min. permit fee
$100.00
Last verified
April 2026
On this page 6
§ 01

Permit authority

City permit program

Street address
114 S. Phillips, Bullard, TX 75757
Coverage
All properties within the incorporated City of Bullard.
Online portal
City Permits
Paper and email submission
§ 02

When a permit is required

Permit triggers and exempt work for Bullard

A building permit is required for residential and commercial construction within the City of Bullard.

Building code
2021 IBC, 2021 IECC, 2021 IRC, 2021 IMC, 2021 IPC, 2006 IFC, 2006 IFGC, and 2023 NEC
Contractor requirements
Plumbers, electricians, and mechanical contractors must pull their own permits before the job starts or fees will double. Subcontractors must provide state licenses and liability insurance.
§ 03

Application process

Application → plan check → issuance → inspection → final

  1. 01
    Use the city permit page to download the current construction packet.
  2. 02
    Submit a completed application, plans, and required energy-compliance materials.
  3. 03
    Ensure each subcontractor pulls the required trade permit before work starts.
  4. 04
    Proceed through the city's listed inspection sequence before final occupancy.

Source: City permit program ↗

§ 04

Fee schedule

Effective November 2025

Fee type
Amount
01
Minimum permit fee
$100.00
02
Permit fee formula
Residential building permit: $15 per 100 square feet. Residential electrical: $5 per 100 sq ft ($50 min); plumbing: $4 per 100 sq ft ($50 min); gas: $1 per 100 sq ft ($50 min); HVAC: $5 per 100 sq ft ($50 min).
03
Reinspection fee
Assessed; fees double if required trade permits are not pulled before work starts
04
Penalty (no permit)
Fees double if required trade permits are not pulled before work starts

Fees change periodically. Confirm at the official fee schedule ↗ (effective November 2025) before budgeting.

§ 05

Required inspections

Scheduling and sequence

Typical sequence: Staged inspections from temporary pole and rough inspections through final. No residential or commercial structure may be occupied before final inspection approval.

§ 06

Frequently asked

Common questions about Bullard permits

01 Do I need a building permit in Bullard, TX?
A building permit is required for residential and commercial construction within the City of Bullard.
02 How much does a building permit cost in Bullard, TX?
Building permit fees in Bullard, TX are set by the local building department and vary by project type and valuation. The minimum permit fee is $100.00. Fees are calculated as: Residential building permit: $15 per 100 square feet. Residential electrical: $5 per 100 sq ft ($50 min); plumbing: $4 per 100 sq ft ($50 min); gas: $1 per 100 sq ft ($50 min); HVAC: $5 per 100 sq ft ($50 min)..
03 How do I apply for a building permit in Bullard, TX?
To apply for a building permit in Bullard, TX, follow these steps: 1. Use the city permit page to download the current construction packet. 2. Submit a completed application, plans, and required energy-compliance materials. 3. Ensure each subcontractor pulls the required trade permit before work starts. 4. Proceed through the city's listed inspection sequence before final occupancy.
last verified April 2026 source City permit program ↗ entry id permits/texas/smith/bullard

Educational reference. Permit rules and fees change — confirm current requirements directly with City permit program before applying. Jaspector is not legal advice.

§   Adjacent

Other jurisdictions in Smith County.

Same county, different permit office. Click for that jurisdiction's full guide.

All Smith County jurisdictions →