How much does a building permit cost in Borough of Danville, PA?

The minimum permit fee is Zoning application fee: $25.00. Residential UCC alterations and renovations: $150.00 minimum before borough administration fee and state surcharge. Non-residential new construction and additions: $500.00 minimum before administration fee and state surcharge.. Fees are calculated as: 20% borough administration fee plus $4.50 state fee added to all UCC permits. Zoning fees: residential 1 and 2 family is $50 plus $0.25 per sq ft; commercial zoning is $200 plus $0.35 per sq ft. Residential UCC new construction: $595 up to 2,500 gross sq ft, then $10 per 100 sq ft or fraction above. Alterations and renovations: 1.5% of total construction cost ($150 minimum). Miscellaneous residential construction: 2% of total construction cost ($125 minimum).. Plan check fee: Non-residential supplemental plan review: 1% of total construction cost ($250 minimum)..

How do I apply for a building permit in Borough of Danville, PA?

1. Contact the Code and Zoning Office before beginning any project; the borough stresses that applicants should reach out before any development or construction activity. 2. Download and complete the applicable forms from the Code and Zoning page, including the zoning permit application, PA-UCC permit application, building specification form, floodplain permit application, or other project-specific documents as needed. 3. Submit the forms, required plans, and fee payment to the borough office. 4. If the property is in the historic district, floodplain, or otherwise needs additional review, complete those approvals before permit issuance. 5. Wait for borough/UCC review and permit issuance before starting work.

City Building Permits

Borough of Danville, PA - 2026 Building Permit Guide

How to apply for a building permit in Borough of Danville, Pennsylvania. Permit authority, application steps, fees, and inspection requirements.

Pennsylvania Montour County Updated March 2026

Permit Authority

Pennsylvania L&I lists Danville Borough as an opt-in UCC municipality with no pre-1999 amendments. The borough Code and Zoning Office is the official intake point for zoning, code, and related permit documents. Barry Isett and Associates serves as technical UCC consultant on permit documents.

Department: Borough of Danville Code and Zoning Office
Address: 463 Mill Street, Danville, PA 17821
Phone: (570) 275-3091
Email: mrhoads@danvilleboro.org
Website: https://danvilleboro.org/code-zoning/

Online Permit Portal

Open Borough of Danville Code and Zoning

Platform: • Account required: No • Submission: In-person only

Additional resources:

Application Process

Contact the Code and Zoning Office before beginning any project; the borough stresses that applicants should reach out before any development or construction activity.
Download and complete the applicable forms from the Code and Zoning page, including the zoning permit application, PA-UCC permit application, building specification form, floodplain permit application, or other project-specific documents as needed.
Submit the forms, required plans, and fee payment to the borough office.
If the property is in the historic district, floodplain, or otherwise needs additional review, complete those approvals before permit issuance.
Wait for borough/UCC review and permit issuance before starting work.

Source: Borough of Danville Code and Zoning Office

General Requirements

The borough provides both zoning and PA-UCC permit applications and a 'What Permits Do I Need' handout. Zoning applications cover structures, additions, fences, pools, signs, parking, home occupations, and changes of use. UCC permits are required for residential and non-residential construction and renovation work as defined by Pennsylvania UCC.

Required Documents

Zoning permit application
PA-UCC permit application
Building specification form
Deck plan submittal guide (for deck projects)
Floodplain development permit application (if in floodplain)
Demolition requirements documentation (for demolition)
Subdivision or land development review application (if applicable)

Building code: Pennsylvania Uniform Construction Code (UCC); Danville Borough is opt-in with no pre-1999 amendments per Pennsylvania L&I.
Contractor requirements: No borough contractor license requirement. Pennsylvania home improvement contractors performing work over $5,000 must register under HICPA.

Fees

Minimum permit fee: Zoning application fee: $25.00. Residential UCC alterations and renovations: $150.00 minimum before borough administration fee and state surcharge. Non-residential new construction and additions: $500.00 minimum before administration fee and state surcharge.
Plan check fee: Non-residential supplemental plan review: 1% of total construction cost ($250 minimum).
Permit fee formula: 20% borough administration fee plus $4.50 state fee added to all UCC permits. Zoning fees: residential 1 and 2 family is $50 plus $0.25 per sq ft; commercial zoning is $200 plus $0.35 per sq ft. Residential UCC new construction: $595 up to 2,500 gross sq ft, then $10 per 100 sq ft or fraction above. Alterations and renovations: 1.5% of total construction cost ($150 minimum). Miscellaneous residential construction: 2% of total construction cost ($125 minimum).
Reinspection fee: Non-residential UCC reinspection or additional inspection fee: $100.00 per hour. Rental reinspection fees: $50 (2nd), $75 (3rd), $100 (4th).
Payment note: Zoning fees are payable at application; UCC permit fees are due at permit pickup and are non-refundable once permit conditions are triggered.

Fees change. Verify current amounts at the official fee schedule.

Work That Does NOT Require a Permit

Contact the Borough of Danville Code and Zoning Office to confirm whether your project requires a permit before starting work.

Inspections

How to Schedule

Inspection hours: Borough office hours: Monday through Thursday 8:00 a.m. to 5:00 p.m.; Friday 8:00 a.m. to 3:30 p.m.

Additional Resources

Building code: Pennsylvania Uniform Construction Code (UCC); Danville Borough is opt-in with no pre-1999 amendments per Pennsylvania L&I.
Verify contractor license: Pennsylvania HICPA Contractor Registration
Zoning information: View zoning info
Danville Borough Municipal Code (eCode360)
Pennsylvania L&I UCC Municipal Elections
License lookup guide: Pennsylvania Contractor License Requirements
Contract template: Pennsylvania Homeowner-Contractor Agreement
Pennsylvania hub: Pennsylvania Contractor License & Permit Hub

Information on this page was last verified: March 2026. Permit rules and fees change — confirm current requirements directly with the Borough of Danville Code and Zoning Office before applying.

Frequently Asked Questions

Borough of Danville Building Permit FAQ

Do I need a building permit in Borough of Danville, PA?: The borough provides both zoning and PA-UCC permit applications and a 'What Permits Do I Need' handout. Zoning applications cover structures, additions, fences, pools, signs, parking, home occupations, and changes of use. UCC permits are required for residential and non-residential construction and renovation work as defined by Pennsylvania UCC.
How much does a building permit cost in Borough of Danville, PA?: The minimum permit fee is Zoning application fee: $25.00. Residential UCC alterations and renovations: $150.00 minimum before borough administration fee and state surcharge. Non-residential new construction and additions: $500.00 minimum before administration fee and state surcharge.. Fees are calculated as: 20% borough administration fee plus $4.50 state fee added to all UCC permits. Zoning fees: residential 1 and 2 family is $50 plus $0.25 per sq ft; commercial zoning is $200 plus $0.35 per sq ft. Residential UCC new construction: $595 up to 2,500 gross sq ft, then $10 per 100 sq ft or fraction above. Alterations and renovations: 1.5% of total construction cost ($150 minimum). Miscellaneous residential construction: 2% of total construction cost ($125 minimum).. Plan check fee: Non-residential supplemental plan review: 1% of total construction cost ($250 minimum)..
How do I apply for a building permit in Borough of Danville, PA?: 1. Contact the Code and Zoning Office before beginning any project; the borough stresses that applicants should reach out before any development or construction activity. 2. Download and complete the applicable forms from the Code and Zoning page, including the zoning permit application, PA-UCC permit application, building specification form, floodplain permit application, or other project-specific documents as needed. 3. Submit the forms, required plans, and fee payment to the borough office. 4. If the property is in the historic district, floodplain, or otherwise needs additional review, complete those approvals before permit issuance. 5. Wait for borough/UCC review and permit issuance before starting work.

Need help with your project?

Navigating permits in Borough of Danville can be complicated.

Jaspector connects you with local experts who can review your scope, verify your contractor, and help you understand what permits your project actually needs.

Learn how Jaspector works

Important: This page is an educational resource provided by jaspector.com. It is not legal advice, and it does not substitute for official guidance from the permit authority listed above. Permit requirements, fees, and processes change frequently. Always verify current requirements directly with the issuing department before beginning any construction project. Use of this page does not create an attorney-client relationship. Jaspector assumes no liability for any outcomes arising from reliance on this information.

Other cities in Montour County

Anthony Township Mahoning Township Liberty Township Valley Township

View all Montour County jurisdictions →