jaspector
City building permits

Town of Franklinville

How to apply for a building permit in Town of Franklinville, North Carolina. Permit authority, application steps, fees, and inspection requirements.

Last verified
April 2026
On this page 6
§ 01

Permit authority

Randolph County Department of Building Inspections

Street address
204 East Academy Street, Asheboro, NC 27203
Coverage
Randolph County expressly states it provides permit issuance and inspections for the municipality of Franklinville. Local zoning process details are limited online.
Online portal
eSuite ePermits
eSuite ePermits
§ 02

When a permit is required

Permit triggers and exempt work for Franklinville

Randolph County issues permits and inspections for Franklinville. State law requires permits for most construction and trade work before commencement.

State-law building permit exemptions under G.S. 160D-1110(c), subject to the listed exceptions
Like-kind electrical fixture/device replacement in one- and two-family dwellings under the statutory conditions
Water-heater replacement in one- and two-family dwellings under the statutory conditions
  • Exempt State-law building permit exemptions under G.S. 160D-1110(c), subject to the listed exceptions
  • Exempt Like-kind electrical fixture/device replacement in one- and two-family dwellings under the statutory conditions
  • Exempt Water-heater replacement in one- and two-family dwellings under the statutory conditions
Required documents
  • County permit application
  • Applicant, project, and contractor details
  • Supporting approvals and plans as needed
Building code
North Carolina State Building Code, enforced locally by Randolph County for building permits and inspections.
Permit validity
No Franklinville-specific rule was publicly posted. County building permits follow state lapse rules and Randolph County's expired-permit reopening fee structure.
Owner-builder
No Franklinville-specific owner-builder guidance was found.
Contractor requirements
State general contractor and trade licensing rules apply through Randolph County permit issuance.
§ 03

Application process

Application → plan check → issuance → inspection → final

  1. 01
    Contact Franklinville Town Hall first if you need confirmation on local land-use or utility-related approvals. The current town website does not publish a dedicated zoning permit page or a current online application workflow.
  2. 02
    Obtain the required building or trade permit from Randolph County Building Inspections through ePermits, by email, or in person.
  3. 03
    Submit the correct county permit application and any supporting approvals, plans, or contractor information required for the work.
  4. 04
    Pay county permit fees, receive the issued permit, and schedule inspections through Randolph County.

Source: Randolph County Department of Building Inspections ↗

§ 04

Fee schedule

Franklinville building permit fees

Fee type
Amount
01
Minimum permit fee
$60 for work up to and including $20,000; $60 trade base fee
02
Plan check fee
$100 residential; $300 commercial
03
Permit fee formula
County building permits are largely valuation-based; electrical, plumbing, and HVAC permits use trade-unit or service-based schedules; county zoning clearance listed as $25 on the permit application, but Franklinville does not publicly post a separate town zoning fee.
04
Reinspection fee
Rejection fees $30 and $60; reopen expired permit $30; doubled fees if issued after work has begun

No Franklinville-specific payment instructions found; county permit payment handled through county channels

Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.

§ 05

Required inspections

Scheduling and sequence

How to schedule
Inspection hours
Monday through Friday, 8 am to 5 pm
Time windows
Inspectors reachable 8 to 9 am and 4 to 5 pm

Typical sequence: County permit issuance, then inspections generally proceed through foundation/slab, rough framing and trades, insulation, and finals.

Live remote inspections available for certain eligible inspection types

§ 06

Frequently asked

Common questions about Franklinville permits

01 Do I need a building permit in Franklinville, NC?
Randolph County issues permits and inspections for Franklinville. State law requires permits for most construction and trade work before commencement.
02 How much does a building permit cost in Franklinville, NC?
Building permit fees in Franklinville, NC are set by the local building department and vary by project type and valuation. The minimum permit fee is $60 for work up to and including $20,000; $60 trade base fee. Fees are calculated as: County building permits are largely valuation-based; electrical, plumbing, and HVAC permits use trade-unit or service-based schedules; county zoning clearance listed as $25 on the permit application, but Franklinville does not publicly post a separate town zoning fee.. Plan check fee: $100 residential; $300 commercial.
03 How do I apply for a building permit in Franklinville, NC?
To apply for a building permit in Franklinville, NC, follow these steps: 1. Contact Franklinville Town Hall first if you need confirmation on local land-use or utility-related approvals. The current town website does not publish a dedicated zoning permit page or a current online application workflow. 2. Obtain the required building or trade permit from Randolph County Building Inspections through ePermits, by email, or in person. 3. Submit the correct county permit application and any supporting approvals, plans, or contractor information required for the work. 4. Pay county permit fees, receive the issued permit, and schedule inspections through Randolph County.
04 What work is exempt from building permits in Franklinville, NC?
Not all construction work requires a permit in Franklinville, NC. The following work is generally exempt: State-law building permit exemptions under G.S. 160D-1110(c), subject to the listed exceptions; Like-kind electrical fixture/device replacement in one- and two-family dwellings under the statutory conditions; Water-heater replacement in one- and two-family dwellings under the statutory conditions. When in doubt, confirm with the local building department before starting work.
05 How do I schedule a building inspection in Franklinville, NC?
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Franklinville, NC via: Randolph County, ePermits.
last verified April 2026 source Randolph County Department of Building Inspections ↗ entry id permits/north-carolina/randolph/franklinville

Educational reference. Permit rules and fees change — confirm current requirements directly with Randolph County Department of Building Inspections before applying. Jaspector is not legal advice.