jaspector
City building permits

Town of Bethania

How to apply for a building permit in Town of Bethania, North Carolina. Permit authority, application steps, fees, and inspection requirements.

Last verified
April 2026
On this page 6
§ 01

Permit authority

Town of Bethania for local contact; building permits and inspections through Winston-Salem/Forsyth County Inspections Division

Street address
Town Hall, 5385 Ham Horton Lane, Bethania, NC 27010
Coverage
Bethania public permit information is very thin. Winston-Salem/Forsyth County handles building permit review and inspections countywide outside High Point, Kernersville, and King.
Additional resources
§ 02

When a permit is required

Permit triggers and exempt work for Bethania

County building/trade permit rules apply for covered building, structural, demolition, plumbing, mechanical, and electrical work.

Limited state-law ordinary repairs not requiring a permit
Window, door, exterior siding, and similar porch/deck surface replacements allowed by the state ordinary-repair exemption
Certain like-kind residential electrical fixture/device replacements allowed by state law without permit
Certain like-kind residential water-heater replacement connections allowed by state law without permit
  • Exempt Limited state-law ordinary repairs not requiring a permit
  • Exempt Window, door, exterior siding, and similar porch/deck surface replacements allowed by the state ordinary-repair exemption
  • Exempt Certain like-kind residential electrical fixture/device replacements allowed by state law without permit
  • Exempt Certain like-kind residential water-heater replacement connections allowed by state law without permit
Required documents
  • County electronic permit package with plans/site plan and any applicable affidavits
Building code
NC State Building Code enforced locally through the city-county inspections office.
Contractor requirements
State licensure requirements apply; county trade permits are geared to licensed contractors.
§ 03

Application process

Application → plan check → issuance → inspection → final

  1. 01
    Submit building permit plans electronically through Winston-Salem/Forsyth County GeoCivix.
  2. 02
    Upload plans/site plan and required affidavits where applicable.
  3. 03
    Respond to review comments and obtain permit issuance.
  4. 04
    Pay county permit fees.
  5. 05
    Schedule inspections through the county system until final approval.

Source: Town of Bethania for local contact; building permits and inspections through Winston-Salem/Forsyth County Inspections Division ↗

§ 04

Fee schedule

Bethania building permit fees

Fee type
Amount
01
Minimum permit fee
County building minimums generally start at $100 building and $75 trade minimums
02
Plan check fee
County commercial plan review schedule applies where relevant
03
Permit fee formula
County mixed square-foot, valuation, and flat-fee schedule
04
Reinspection fee
County extra-trip and start-without-permit penalties apply

County payments are handled inside the city-county systems; no separate Bethania building fee portal was located.

Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.

§ 05

Required inspections

Scheduling and sequence

How to schedule
Inspection hours
Monday through Friday, 7:45 a.m. to 4:45 p.m.

Typical sequence: County permit issuance, rough inspections, finals, closeout

§ 06

Frequently asked

Common questions about Bethania permits

01 Do I need a building permit in Bethania, NC?
County building/trade permit rules apply for covered building, structural, demolition, plumbing, mechanical, and electrical work.
02 How much does a building permit cost in Bethania, NC?
Building permit fees in Bethania, NC are set by the local building department and vary by project type and valuation. The minimum permit fee is County building minimums generally start at $100 building and $75 trade minimums. Fees are calculated as: County mixed square-foot, valuation, and flat-fee schedule. Plan check fee: County commercial plan review schedule applies where relevant.
03 How do I apply for a building permit in Bethania, NC?
To apply for a building permit in Bethania, NC, follow these steps: 1. Submit building permit plans electronically through Winston-Salem/Forsyth County GeoCivix. 2. Upload plans/site plan and required affidavits where applicable. 3. Respond to review comments and obtain permit issuance. 4. Pay county permit fees. 5. Schedule inspections through the county system until final approval.
04 What work is exempt from building permits in Bethania, NC?
Not all construction work requires a permit in Bethania, NC. The following work is generally exempt: Limited state-law ordinary repairs not requiring a permit; Window, door, exterior siding, and similar porch/deck surface replacements allowed by the state ordinary-repair exemption; Certain like-kind residential electrical fixture/device replacements allowed by state law without permit; Certain like-kind residential water-heater replacement connections allowed by state law without permit. When in doubt, confirm with the local building department before starting work.
05 How do I schedule a building inspection in Bethania, NC?
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Bethania, NC via: County BuildIT.

Educational reference. Permit rules and fees change — confirm current requirements directly with Town of Bethania for local contact; building permits and inspections through Winston-Salem/Forsyth County Inspections Division before applying. Jaspector is not legal advice.