On this page 6
§ 02
When a permit is required
Permit triggers and exempt work for Midway
Midway zoning administration is handled by Davidson County, and county building permits are required for code-regulated building, electrical, plumbing, and mechanical work.
Limited work exempt under NC statute may not require a county permit if no structural or trade threshold is triggered
Like-kind repairs may be exempt in some cases
- Exempt Limited work exempt under NC statute may not require a county permit if no structural or trade threshold is triggered
- Exempt Like-kind repairs may be exempt in some cases
Note: Midway zoning review administered by Davidson County may still apply even where a county building permit is exempt.
Required documents
- County permit application
- Plans as required
- Contractor information
- Zoning approvals or supporting records requested by Davidson County for Midway properties
- Building code
- 2018 NC State Building Code suite with state amendments
- Permit validity
- County building permits generally follow NC expiration rules; no separate Midway timing rule was posted on the reviewed pages.
- Owner-builder
- County forms include owner or self-contractor certifications and workers-compensation affidavits where applicable.
- Contractor requirements
- State licensing rules apply.
§ 03
Application process
Application → plan check → issuance → inspection → final
- 01 Start with Davidson County Planning and Zoning for Midway ordinance administration and project-screening questions.
- 02 Confirm any Midway-specific zoning or land-use requirements that Davidson County administers on the town's behalf.
- 03 Apply for the building or trade permit through Davidson County OpenGov or at the county counter.
- 04 Upload plans, valuation, contractor information, and supporting documents required by the county.
- 05 Pay the county permit fees and any separate town charges that may apply.
- 06 Request inspections through OpenGov and complete final approvals through county inspections staff.
§ 04
Fee schedule
Midway building permit fees
Fee type
Amount
01
Minimum permit fee
Midway's posted 2025-2026 fee ordinance did not list a separate zoning-permit minimum on the reviewed page; county residential building permits start at $70 and many county trade permits have $40 minimums
02
Plan check fee
County commercial plan review is tiered by construction cost, approximately $25 to $200
03
Permit fee formula
Midway's posted fee ordinance covers general town fees and sewer fees; county building permits are valuation-based and trade permits are flat or formula-based
04
Reinspection fee
County extra trips or reinspections are $100
County OpenGov supports online filing
Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.
§ 05
Required inspections
Scheduling and sequence
How to schedule
- Davidson County OpenGov (online)
Typical sequence: County sequence by permit type, commonly footing, foundation, rough-ins, framing, insulation, and finals
§ 06
Frequently asked
Common questions about Midway permits
01 Do I need a building permit in Midway, NC? ▸
Midway zoning administration is handled by Davidson County, and county building permits are required for code-regulated building, electrical, plumbing, and mechanical work.
02 How much does a building permit cost in Midway, NC? ▸
Building permit fees in Midway, NC are set by the local building department and vary by project type and valuation. The minimum permit fee is Midway's posted 2025-2026 fee ordinance did not list a separate zoning-permit minimum on the reviewed page; county residential building permits start at $70 and many county trade permits have $40 minimums. Fees are calculated as: Midway's posted fee ordinance covers general town fees and sewer fees; county building permits are valuation-based and trade permits are flat or formula-based. Plan check fee: County commercial plan review is tiered by construction cost, approximately $25 to $200.
03 How do I apply for a building permit in Midway, NC? ▸
To apply for a building permit in Midway, NC, follow these steps: 1. Start with Davidson County Planning and Zoning for Midway ordinance administration and project-screening questions. 2. Confirm any Midway-specific zoning or land-use requirements that Davidson County administers on the town's behalf. 3. Apply for the building or trade permit through Davidson County OpenGov or at the county counter. 4. Upload plans, valuation, contractor information, and supporting documents required by the county. 5. Pay the county permit fees and any separate town charges that may apply. 6. Request inspections through OpenGov and complete final approvals through county inspections staff.
04 What work is exempt from building permits in Midway, NC? ▸
Not all construction work requires a permit in Midway, NC. The following work is generally exempt: Limited work exempt under NC statute may not require a county permit if no structural or trade threshold is triggered; Like-kind repairs may be exempt in some cases. Note: Midway zoning review administered by Davidson County may still apply even where a county building permit is exempt. When in doubt, confirm with the local building department before starting work.
05 How do I schedule a building inspection in Midway, NC? ▸
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Midway, NC via: Davidson County OpenGov.
last verified April 2026
source Davidson County Planning and Zoning administers the Town of Midway ordinances; Davidson County Central Permitting handles building permits and inspections ↗
entry id permits/north-carolina/davidson/midway
Educational reference. Permit rules and fees change — confirm current requirements directly with Davidson County Planning and Zoning administers the Town of Midway ordinances; Davidson County Central Permitting handles building permits and inspections before applying. Jaspector is not legal advice.