jaspector
§ KY Scott County
City building permits

Town of Sadieville

How to apply for a building permit in Town of Sadieville, Kentucky. Permit authority, application steps, fees, and inspection requirements.

Code adoption
Kentucky Building Code and Kentucky Residential Code
Min. permit fee
$103
Last verified
April 2026
On this page 6
§ 01

Permit authority

Georgetown / Scott County Building Inspection Department

Street address
125 W Clinton Street, Georgetown, KY 40324
Coverage
The Town Board of Sadieville joined the Georgetown city council and the Scott County Fiscal Court in the joint zoning ordinance, so Sadieville's permits and inspections are handled by the joint Building Inspection Department.
Online portal
Forms & Applications
CivicPlus / CivicEngage Document Center
§ 02

When a permit is required

Permit triggers and exempt work for Sadieville

Excavation, construction, moving, or alteration (including accessory buildings) and the installation of permanent electrical, plumbing, or fuel connections must wait until the Building Inspector issues a permit.

Local public utility distributing and collecting structures such as pipes, transmission lines, transformers, and meters
Public streets and necessary appurtenances for traffic control (signs must meet the Kentucky Department of Highways code)
Private drives, private parking areas, and parking incident to the principal use on the same premises
Horticulture, landscaping, and normal accessory fences
Agricultural structures other than dwelling units in A-1 or C-1 districts
Recurring maintenance work and subdivision-imposed improvements
  • Exempt Local public utility distributing and collecting structures such as pipes, transmission lines, transformers, and meters
  • Exempt Public streets and necessary appurtenances for traffic control (signs must meet the Kentucky Department of Highways code)
  • Exempt Private drives, private parking areas, and parking incident to the principal use on the same premises
  • Exempt Horticulture, landscaping, and normal accessory fences
  • Exempt Agricultural structures other than dwelling units in A-1 or C-1 districts
  • Exempt Recurring maintenance work and subdivision-imposed improvements
Required documents
  • Completed permit application with applicant/contractor information, structure dimensions, and construction cost
  • Scaled plan with lot and structure dimensions, yard depths, uses, and screening
  • County Health Officer's certificate for water and sewage approval when applicable
  • Applicant's attestation that a complete set of construction documents is enclosed
Building code
Kentucky Building Code and Kentucky Residential Code
Permit validity
A permit becomes void six months after issuance unless substantial progress has been made, but it can be renewed before it lapses.
Owner-builder
The standard application lets the applicant check Owner, Contractor, or Both and requires a signed acknowledgement that the information and construction documents are accurate, so owner-builders must meet the same documentation and affidavit requirements as contractors.
Contractor requirements
Contractors must submit proof of insurance, workers compensation, and affidavits on the application. The local office coordinates with the DHBC state inspectors for building, electrical, plumbing, HVAC, and manufactured housing work.
§ 03

Application process

Typical processing: The enforcement officer is required to act on permit applications within ten days of submission.

  1. 01
    Pick the appropriate residential, commercial, or specialty PDF from the Forms & Applications list and fill in all applicant/contractor information, structure dimensions, construction cost, and the certification that a complete set of construction documents is included.
  2. 02
    Assemble the supporting materials required by the zoning ordinance: scaled plans showing the lot dimensions, existing structures, yard depths, required screening, and a County Health Officer certificate approving water and sewage when applicable.
  3. 03
    Submit the application, drawings, and fees (fast-track option doubles the fee for residential/sign projects); the building inspection staff plan reviews the package for compliance with the Kentucky codes, zoning ordinance, and local policies, then issues the permit after those submittals are approved.
  4. 04
    After the plan review clears, the permit is issued, and the job can proceed; major revisions trigger an additional plan-review fee and the office retains a permanent file of the approval.

Typical processing time: The enforcement officer is required to act on permit applications within ten days of submission.

Source: Georgetown / Scott County Building Inspection Department ↗

§ 04

Fee schedule

Effective July 1, 2025

Fee type
Amount
01
Minimum permit fee
$103
02
Plan check fee
Residential projects charged per square foot ($0.23 with a $360 minimum); commercial plan review charged per square foot by occupancy type (15 cents for assembly, business, factory/industrial, mercantile, and residential; 12 cents for storage; 10 cents for utility/miscellaneous)
03
Permit fee formula
Valuation-based 'Cost of Construction' tiers; fast-track processing doubles the permit fee for eligible projects
04
Reinspection fee
$52 for second reinspection; each additional reinspection doubles the last fee
05
Penalty (no permit)
Starting work without a permit doubles the permit fee; HVAC violations carry escalating penalties up to $500 per offense

Permits issue only after the application, drawings, and payment are approved. Fees can be refunded at 60% prior to the first inspection; after that point all fees are nonrefundable.

Fees change periodically. Confirm at the official fee schedule ↗ (effective July 1, 2025) before budgeting.

§ 05

Required inspections

Scheduling and sequence

How to schedule
  • 502-863-9802 (phone)
Inspection hours
Monday through Friday from 8 am to 4 pm, closing for lunch from noon to 1:30 pm

Typical sequence: Standard inspections cover footing, foundation, slab, framing, insulation, and final; the first inspection of each type is included in the permit fee.

§ 06

Frequently asked

Common questions about Sadieville permits

01 Do I need a building permit in Sadieville, KY?
Excavation, construction, moving, or alteration (including accessory buildings) and the installation of permanent electrical, plumbing, or fuel connections must wait until the Building Inspector issues a permit.
02 How much does a building permit cost in Sadieville, KY?
Building permit fees in Sadieville, KY are set by the local building department and vary by project type and valuation. The minimum permit fee is $103. Fees are calculated as: Valuation-based 'Cost of Construction' tiers; fast-track processing doubles the permit fee for eligible projects. Plan check fee: Residential projects charged per square foot ($0.23 with a $360 minimum); commercial plan review charged per square foot by occupancy type (15 cents for assembly, business, factory/industrial, mercantile, and residential; 12 cents for storage; 10 cents for utility/miscellaneous).
03 How do I apply for a building permit in Sadieville, KY?
To apply for a building permit in Sadieville, KY, follow these steps: 1. Pick the appropriate residential, commercial, or specialty PDF from the Forms & Applications list and fill in all applicant/contractor information, structure dimensions, construction cost, and the certification that a complete set of construction documents is included. 2. Assemble the supporting materials required by the zoning ordinance: scaled plans showing the lot dimensions, existing structures, yard depths, required screening, and a County Health Officer certificate approving water and sewage when applicable. 3. Submit the application, drawings, and fees (fast-track option doubles the fee for residential/sign projects); the building inspection staff plan reviews the package for compliance with the Kentucky codes, zoning ordinance, and local policies, then issues the permit after those submittals are approved. 4. After the plan review clears, the permit is issued, and the job can proceed; major revisions trigger an additional plan-review fee and the office retains a permanent file of the approval.
04 How long does it take to get a building permit in Sadieville, KY?
Building permit processing times in Sadieville, KY typically run The enforcement officer is required to act on permit applications within ten days of submission.. Timelines can vary based on project complexity and current department workload.
05 What work is exempt from building permits in Sadieville, KY?
Not all construction work requires a permit in Sadieville, KY. The following work is generally exempt: Local public utility distributing and collecting structures such as pipes, transmission lines, transformers, and meters; Public streets and necessary appurtenances for traffic control (signs must meet the Kentucky Department of Highways code); Private drives, private parking areas, and parking incident to the principal use on the same premises; Horticulture, landscaping, and normal accessory fences; Agricultural structures other than dwelling units in A-1 or C-1 districts; Recurring maintenance work and subdivision-imposed improvements. When in doubt, confirm with the local building department before starting work.
06 How do I schedule a building inspection in Sadieville, KY?
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Sadieville, KY via: 502-863-9802.
last verified April 2026 source Georgetown / Scott County Building Inspection Department ↗ entry id permits/kentucky/scott/sadieville

Educational reference. Permit rules and fees change — confirm current requirements directly with Georgetown / Scott County Building Inspection Department before applying. Jaspector is not legal advice.

§   Adjacent

Other jurisdictions in Scott County.

Same county, different permit office. Click for that jurisdiction's full guide.

All Scott County jurisdictions →