jaspector
§ KY Logan County
City building permits

City of Russellville

How to apply for a building permit in City of Russellville, Kentucky. Permit authority, application steps, fees, and inspection requirements.

Avg processing
Not published
Min. permit fee
$35
Last verified
April 2026
On this page 6
§ 01

Permit authority

City of Russellville Department of Housing, Building and Construction

Street address
168 South Main Street, Russellville, KY 42276
Coverage
All properties within the incorporated City of Russellville. The Building Code and Zoning Department reviews building, excavation, firework, and other permit packets for the city limits.
Online portal
Building Permit Applications
City of Russellville municipal website
Additional resources
§ 02

When a permit is required

Permit triggers and exempt work for Russellville

Any construction, enlargement, alteration, relocation, demolition, change of occupancy affecting structural systems or sanitary facilities, or installation of equipment triggering structural/floodplain review requires a permit.

Note: A public exemption list is not available on the building permit page or ordinance; applicants should confirm with the Building Official before proceeding.

Required documents
  • Detailed site plan
  • Building/construction plans conforming to Kentucky Building Code
  • Documentation showing the intended use complies with zoning
Building code
International Building Code (commercial) and International Residential Building Code (one- and two-family) with Kentucky amendments
Permit validity
Permits expire 12 months after issuance unless revoked; a six-month extension can be granted if diligent progress is shown.
Contractor requirements
Contractors must be licensed in Kentucky, carry required insurance, and obtain a city occupational business license before working within Russellville.
§ 03

Application process

Typical processing: Not published

  1. 01
    Provide a Site Plan application showing the parcel, utilities, driveways, storm-water, and improvements, and submit it to the Building Official before beginning excavation or new construction.
  2. 02
    Deliver building/construction plans that conform to the adopted building code along with documentation that the proposed use complies with zoning and utility requirements.
  3. 03
    Pay the applicable fees, receive the permit (valid for 12 months), and start work only after the permit is issued; a six-month extension is available with a written request and additional fees if work is progressing.
  4. 04
    Schedule inspections (footers/foundations, rough-in, final) through the Building Official; a Certificate of Occupancy must be issued before use, except for temporary COs approved under hardship.

Typical processing time: Not published

Source: City of Russellville Department of Housing, Building and Construction ↗

§ 04

Fee schedule

Russellville building permit fees

Fee type
Amount
01
Minimum permit fee
$35
02
Permit fee formula
Flat fees by category (dwelling, addition, garage, carport, storage building, commercial) per Ordinance 86-5

Fees must be paid before work begins, payable to the City.

§ 05

Required inspections

Scheduling and sequence

How to schedule
  • Building Official (phone)
  • City Hall (in-person)
Scheduling deadline
At least 24 hours' notice required
Inspection hours
Normal municipal business hours

Typical sequence: Footer/foundation, rough-in, and final inspections are required stages.

§ 06

Frequently asked

Common questions about Russellville permits

01 Do I need a building permit in Russellville, KY?
Any construction, enlargement, alteration, relocation, demolition, change of occupancy affecting structural systems or sanitary facilities, or installation of equipment triggering structural/floodplain review requires a permit.
02 How much does a building permit cost in Russellville, KY?
Building permit fees in Russellville, KY are set by the local building department and vary by project type and valuation. The minimum permit fee is $35. Fees are calculated as: Flat fees by category (dwelling, addition, garage, carport, storage building, commercial) per Ordinance 86-5.
03 How do I apply for a building permit in Russellville, KY?
To apply for a building permit in Russellville, KY, follow these steps: 1. Provide a Site Plan application showing the parcel, utilities, driveways, storm-water, and improvements, and submit it to the Building Official before beginning excavation or new construction. 2. Deliver building/construction plans that conform to the adopted building code along with documentation that the proposed use complies with zoning and utility requirements. 3. Pay the applicable fees, receive the permit (valid for 12 months), and start work only after the permit is issued; a six-month extension is available with a written request and additional fees if work is progressing. 4. Schedule inspections (footers/foundations, rough-in, final) through the Building Official; a Certificate of Occupancy must be issued before use, except for temporary COs approved under hardship.
04 How long does it take to get a building permit in Russellville, KY?
Building permit processing times in Russellville, KY typically run Not published. Timelines can vary based on project complexity and current department workload.
05 How do I schedule a building inspection in Russellville, KY?
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Russellville, KY via: Building Official, City Hall. At least 24 hours' notice required.
last verified April 2026 source City of Russellville Department of Housing, Building and Construction ↗ entry id permits/kentucky/logan/russellville

Educational reference. Permit rules and fees change — confirm current requirements directly with City of Russellville Department of Housing, Building and Construction before applying. Jaspector is not legal advice.

§   Adjacent

Other jurisdictions in Logan County.

Same county, different permit office. Click for that jurisdiction's full guide.

All Logan County jurisdictions →