jaspector
City building permits

Village of Arthur

How to apply for a building permit in Village of Arthur, Illinois. Permit authority, application steps, fees, and inspection requirements.

Min. permit fee
$25
Last verified
April 2026
On this page 5
§ 01

Permit authority

Village of Arthur enforcing officer

Coverage
Village of Arthur
§ 02

When a permit is required

Permit triggers and exempt work for Arthur

permit application is used for new construction, additions, garages, fences, pools, and other work

The application specifically lists fee special cases for fences, decks, non-digital signs, digital signs, above-ground pools, and in-ground pools
  • Exempt The application specifically lists fee special cases for fences, decks, non-digital signs, digital signs, above-ground pools, and in-ground pools
Required documents
  • site and plot plan, project details, floodplain information if applicable
Owner-builder
application is signed by owner or contractor
§ 03

Application process

Application → plan check → issuance → inspection → final

  1. 01
    Fill out the Village of Arthur building permit application.
  2. 02
    Include PIN, project cost, location, dimensions, type of permit, use, setbacks, foundation, floodplain status, and attached site/plot plan.
  3. 03
    Submit for approval by the enforcing officer.
  4. 04
    Pay the permit fee at issuance.

Source: Village of Arthur enforcing officer ↗

§ 04

Fee schedule

Arthur building permit fees

Fee type
Amount
01
Minimum permit fee
$25
02
Permit fee formula
$0.10 per square foot, minimum $25, maximum $2,000

Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.

§ 05

Frequently asked

Common questions about Arthur permits

01 Do I need a building permit in Arthur, IL?
permit application is used for new construction, additions, garages, fences, pools, and other work
02 How much does a building permit cost in Arthur, IL?
Building permit fees in Arthur, IL are set by the local building department and vary by project type and valuation. The minimum permit fee is $25. Fees are calculated as: $0.10 per square foot, minimum $25, maximum $2,000.
03 How do I apply for a building permit in Arthur, IL?
To apply for a building permit in Arthur, IL, follow these steps: 1. Fill out the Village of Arthur building permit application. 2. Include PIN, project cost, location, dimensions, type of permit, use, setbacks, foundation, floodplain status, and attached site/plot plan. 3. Submit for approval by the enforcing officer. 4. Pay the permit fee at issuance.
04 What work is exempt from building permits in Arthur, IL?
Not all construction work requires a permit in Arthur, IL. The following work is generally exempt: The application specifically lists fee special cases for fences, decks, non-digital signs, digital signs, above-ground pools, and in-ground pools. When in doubt, confirm with the local building department before starting work.
last verified April 2026 source Village of Arthur enforcing officer ↗ entry id permits/illinois/moultrie/arthur

Educational reference. Permit rules and fees change — confirm current requirements directly with Village of Arthur enforcing officer before applying. Jaspector is not legal advice.

§   Adjacent

Other jurisdictions in Moultrie County.

Same county, different permit office. Click for that jurisdiction's full guide.

All Moultrie County jurisdictions →