On this page 6
§ 02
When a permit is required
Permit triggers and exempt work for Glennville
Glennville publicly posts multiple permit forms and states that the city performs building construction inspections and issues permits for construction-related work; separate permits are expressly required for electrical, plumbing, heating, and mechanical work
Note: No public exempt-work list was found on the reviewed Glennville permit and Code Enforcement pages
Required documents
- Completed permit application
- Parcel and lot information
- Contractor and owner information
- Valuation
- Work description
- Contractor license numbers
- Additional plans or supporting materials may be required depending on project type
- Building code
- Georgia State Minimum Standard Codes; Glennville's public business page states the city performs inspections to ensure adherence to applicable codes; no separate Glennville local building code amendment page was located
- Permit validity
- Permit becomes null and void if work is not commenced within 6 months, or if work is suspended or abandoned for 6 months after commencement
- Owner-builder
- Georgia state law allows an owner to act as his or her own contractor on property owned by that person and intended solely for that person or the person's family, firm, or corporation, subject to O.C.G.A. 43-41-17(h), including the 24-month anti-speculation limitation
- Contractor requirements
- Glennville's building permit form requests city and state license numbers; Georgia state contractor licensing rules apply
§ 03
Application process
Application → plan check → issuance → inspection → final
- 01 Start with Glennville Code Enforcement at co@glennvillega.gov or (912) 654-2461
- 02 Download the applicable permit form from the Code Enforcement or Business pages
- 03 Complete the building permit application with owner, contractor, parcel, lot, valuation, work classification, and construction details
- 04 Provide contractor license information; the building permit form requests both city and state license numbers
- 05 Submit the application and any related trade permit applications; Glennville requires separate permits for electrical, plumbing, heating, and mechanical work
- 06 Pay the assessed permit fees and wait for issuance by the Code Enforcement Officer or authorized representative before starting work
- 07 Schedule the required inspections through Code Enforcement
§ 04
Fee schedule
Glennville building permit fees
Fee type
Amount
01
Minimum permit fee
No fee for alteration or repair work valued from $0 to $1,000
02
Permit fee formula
New construction and additions are $0.35 per square foot; alteration and repair fees are valuation-based
Fees change periodically. Confirm at the official fee schedule ↗ before budgeting.
§ 05
Required inspections
Scheduling and sequence
How to schedule
- Contact Glennville Code Enforcement by phone at (912) 654-2461 or (912) 455-5072 (phone)
- Contact by email at co@glennvillega.gov (email)
- Inspection hours
- 8 a.m. to 5 p.m.
Typical sequence: Glennville performs structural, plumbing, electrical, and mechanical inspections and issues certificates of occupancy, but does not publish a step-by-step sequence
§ 06
Frequently asked
Common questions about Glennville permits
01 Do I need a building permit in Glennville, GA? ▸
Glennville publicly posts multiple permit forms and states that the city performs building construction inspections and issues permits for construction-related work; separate permits are expressly required for electrical, plumbing, heating, and mechanical work
02 How much does a building permit cost in Glennville, GA? ▸
Building permit fees in Glennville, GA are set by the local building department and vary by project type and valuation. The minimum permit fee is No fee for alteration or repair work valued from $0 to $1,000. Fees are calculated as: New construction and additions are $0.35 per square foot; alteration and repair fees are valuation-based.
03 How do I apply for a building permit in Glennville, GA? ▸
To apply for a building permit in Glennville, GA, follow these steps: 1. Start with Glennville Code Enforcement at co@glennvillega.gov or (912) 654-2461 2. Download the applicable permit form from the Code Enforcement or Business pages 3. Complete the building permit application with owner, contractor, parcel, lot, valuation, work classification, and construction details 4. Provide contractor license information; the building permit form requests both city and state license numbers 5. Submit the application and any related trade permit applications; Glennville requires separate permits for electrical, plumbing, heating, and mechanical work 6. Pay the assessed permit fees and wait for issuance by the Code Enforcement Officer or authorized representative before starting work 7. Schedule the required inspections through Code Enforcement
04 How do I schedule a building inspection in Glennville, GA? ▸
Once your permit is issued and work reaches an inspection milestone, you can schedule a building inspection in Glennville, GA via: Contact Glennville Code Enforcement by phone at (912) 654-2461 or (912) 455-5072, Contact by email at co@glennvillega.gov.
last verified April 2026
source City of Glennville Code Enforcement ↗
entry id permits/georgia/tattnall/glennville
Educational reference. Permit rules and fees change — confirm current requirements directly with City of Glennville Code Enforcement before applying. Jaspector is not legal advice.