City Building Permits

Asheboro, NORTH-CAROLINA Building Permit Guide

How to apply for a building permit in Asheboro, North Carolina. Permit authority, application steps, fees, and inspection requirements.

North Carolina Randolph County Updated March 2026

Permit Authority

Asheboro processes zoning and building-related permit applications inside the city planning jurisdiction through its own permit portal.

Department
City of Asheboro Planning and Zoning, within the Community Development Division
Address
146 N Church Street, Asheboro, NC 27203; mailing address PO Box 1106, Asheboro, NC 27204
Phone
336-626-1201
Website
https://www.asheboronc.gov/government/departments/planning___zoning/index.php

Online Permit Portal

Open iWorQ Permit Portal

Platform: iWorQ • Account required: No • Submission: In-person only

Additional resources:

Application Process

  1. Choose the correct application in the iWorQ portal (electrical, mechanical, plumbing, single-family/residential accessory building, multi-family/nonresidential, zoning, sign, change of occupancy, fire code, or driveway permit).
  2. Enter property information and contractor information if applicable.
  3. Upload the required materials, including site plan for zoning applications and additional plans for nonresidential or complex work.
  4. City staff reviews the application and contacts the applicant if more information is needed.
  5. Required fees are communicated by email with a secure payment link from wo.iworq.net.
  6. After issuance, permittees can use the portal to upload additional documents and request inspections.

Source: City of Asheboro Planning and Zoning, within the Community Development Division

General Requirements

Permits are required for zoning, building, trade, sign, driveway, change of occupancy, and fire code work. State law requires permits before construction, reconstruction, alteration, repair, movement, demolition, and most trade work.

Required Documents

  • Application details by permit type
  • Site plan for zoning permits
  • Contractor information where applicable
  • Plans and additional documentation as requested by staff
Permit validity
No city-specific expiration rule was located. North Carolina permits generally lapse after 6 months of inactivity under G.S. 160D-1114.
Building code
North Carolina State Building Code. OSFM's current-codes pages show the 2018 code family remains in force pending delayed 2024 rollout.
Owner-builder
No Asheboro-specific owner-builder handout was found. State owner-builder exemptions apply; inspections for owner-exempt permits require the owner to be present unless sealed plans are used under G.S. 160D-1114.
Contractor requirements
General contractors must be licensed for projects costing $40,000 or more under North Carolina law. Electrical contracting must be by a person licensed under G.S. 87-43 when licensure is required.

Fees

Minimum permit fee
$35 permanent sign permits; $25 temporary signs per 30 days
Plan check fee
Zoning Compliance Permit includes site plan review and certificate of zoning compliance
Permit fee formula
Flat fees posted for zoning items such as zoning compliance permits, land disturbance permits, change of occupancy, signs, floodplain development permits, and rezoning applications. Building permit fees are communicated after review.
Payment note
Staff emails a secure payment link after review from wo.iworq.net

Fees change. Verify current amounts at the official fee schedule.

Work That Does NOT Require a Permit

  • Construction, installation, repair, replacement, or alteration costing $40,000 or less in a single-family residence, farm building, or commercial building, unless it adds or repairs load-bearing structures, changes plumbing design, changes HVAC or electrical design, uses non-code materials, adds roofing rather than replacing roofing, or involves fire-code work
  • Like-kind replacement of electrical receptacles, switches, and lighting fixtures in a one- or two-family dwelling by a licensed electrical contractor, subject to G.S. 160D-1110(a)(4)
  • Water-heater replacement in a one- or two-family dwelling when the statutory conditions in G.S. 160D-1110(a)(2) are met

Inspections

How to Schedule

Typical inspection sequence: Typically footing/foundation or slab, rough framing and rough trade inspections, insulation where applicable, then final inspections. This sequence is consistent with standard NC practice but Asheboro did not publish a simple sequence chart.

Additional Resources

Information on this page was last verified: March 2026. Permit rules and fees change — confirm current requirements directly with the City of Asheboro Planning and Zoning, within the Community Development Division before applying.

Need help with your project?

Navigating permits in Asheboro can be complicated.

Jaspector connects you with local experts who can review your scope, verify your contractor, and help you understand what permits your project actually needs.

Learn how Jaspector works
Important: This page is an educational resource provided by jaspector.com. It is not legal advice, and it does not substitute for official guidance from the permit authority listed above. Permit requirements, fees, and processes change frequently. Always verify current requirements directly with the issuing department before beginning any construction project. Use of this page does not create an attorney-client relationship. Jaspector assumes no liability for any outcomes arising from reliance on this information.

Other cities in Randolph County

archdale randleman ramseur franklinville
View all Randolph County jurisdictions →