County Building Permits
Henderson County Building Permit Guide (Unincorporated Area)
How to apply for a building permit in unincorporated Henderson County, North Carolina. Permit authority, application steps, fees, and inspection requirements.
Permit Authority
Covers unincorporated Henderson County outside incorporated municipal limits. County planning, zoning, floodplain, environmental health, and erosion-control approvals may also be required depending on the site and project.
- Department
- Henderson County Permits & Inspections Department
- Address
- 100 N. King St., Hendersonville, NC 28792
- Phone
- 828-697-4830
Online Permit Portal
Platform: SmartGov • Account required: Yes • Submission: In-person only
Application Process
- Identify the project type and pull the correct county checklist or application package for single-family, commercial, manufactured-home, or trade work.
- Gather plans, owner and contractor information, and any outside approvals such as septic, erosion control, floodplain, or driveway approvals if required for the parcel.
- Submit the permit through SmartGov or at the permit center.
- Pay the permit fees once county review is complete.
- Receive the permit and schedule inspections through Henderson County until final approval.
Typical processing time: No universal county turnaround was published on the cited pages.
General Requirements
The county fee schedule and applications show permits for new homes, additions, remodels, manufactured homes, commercial work, signs, demolition, retaining walls, pools, solar, reroofs, foundation repair, accessory structures, stand-alone trade permits, and other listed activities.
Required Documents
- County application and plans
- Project valuation or square footage information
- Contractor information
- Owner's affidavit if applicable
- All other required approvals triggered by the project
- Permit validity
- County renewal fee is 25 percent of the original fee for expired permits.
- Building code
- North Carolina State Building Code, currently enforced as the 2018 code with approved statewide amendments.
- Owner-builder
- The residential checklist references an owner's affidavit if applicable.
- Contractor requirements
- North Carolina general contractors must be licensed for projects of $40,000 or more; electrical contractors must hold the required NC state electrical license.
Fees
- Minimum permit fee
- $75
- Plan check fee
- No separate plan check fee found
- Permit fee formula
- Commercial permits are $7.00 per $1,000 of project cost with a $75 minimum; residential homes, additions, remodels, and accessory structures are charged by square footage or flat amount depending on permit type
- Reinspection fee
- $75
- Penalty (no permit)
- $200 plus permit fee for starting work without permits; renewal fee 25 percent of original fee
- Payment note
- County publishes SmartGov as the online application method; in-person filing is also available at the permit center
Fees change. Verify current amounts at the official fee schedule (effective 2025-2026).
Work That Does NOT Require a Permit
Contact the Henderson County Permits & Inspections Department to confirm whether your project requires a permit before starting work.
Inspections
How to Schedule
- SmartGov portal (online)
- 828-697-4830 (phone)
- Inspection hours
- Public office address, phone, and online application portal are published; no inspection time window was found
Typical inspection sequence: Permit issuance, foundation and framing stages as applicable, trade inspections, final inspections, and closeout
Additional Resources
- Building code: North Carolina State Building Code, currently enforced as the 2018 code with approved statewide amendments.
- Verify contractor license: NC Licensing Board for General Contractors
- Zoning information: View zoning info
- Henderson County Fee Schedule
- Single-Family Dwelling Permit Application & Checklist
- Commercial Application & Submittals
- Manufactured Home Permit Application
- NC State Building Code Amendments
- License lookup guide: North Carolina Contractor License Requirements
- Contract template: North Carolina Homeowner-Contractor Agreement
- North Carolina hub: North Carolina Contractor License & Permit Hub
Information on this page was last verified: March 2026. Permit rules and fees change — confirm current requirements directly with the Henderson County Permits & Inspections Department before applying.
Need help with your project?
Navigating permits in Unincorporated Henderson County can be complicated.
Jaspector connects you with local experts who can review your scope, verify your contractor, and help you understand what permits your project actually needs.
Learn how Jaspector works