City Building Permits
Town of Bolton, NY - Building Permit Guide
How to apply for a building permit in Town of Bolton, New York. Permit authority, application steps, fees, and inspection requirements.
Permit Authority
Warren County administers the Uniform Code building permit for the Town of Bolton. Local zoning administration is handled by the Town of Bolton.
- Department
- Warren County Fire Prevention and Building Code Enforcement
- Address
- Warren County Human Services Building, 3rd Floor, 1340 State Route 9, Lake George, NY 12845
- Phone
- 518-761-6542
Online Permit Portal
Platform: form-based • Account required: No • Submission: In-person only
Additional resources:
Application Process
- Confirm zoning and land-use compliance with the Town of Bolton first.
- Obtain local zoning signoff on the plan set; Warren County requires plan sets signed or initialed by the town zoning officer.
- Submit the county application, required insurance forms, and plans to Warren County Building Codes.
- Wait for county review and permit issuance before starting work.
- Schedule county inspections and final approval.
Typical processing time: Minimum 2 weeks after county submission; varies by plan complexity
Source: Warren County Fire Prevention and Building Code Enforcement
General Requirements
A building permit is required for all construction within Bolton under Warren County jurisdiction.
Required Documents
- County building permit application
- Two plan sets signed or initialed by town zoning officer
- Construction plans and specifications
- Insurance proof or exemption forms
- Project scope and site information
- Permit validity
- Permits expire if work is not started or completed within the specified timeframe; check county schedule for details.
- Building code
- NYS Uniform Code and NYS Energy Code
- Owner-builder
- Owner-builders may be required to submit proof of workers' compensation or disability insurance, or a NY State exemption form.
- Contractor requirements
- Contractors must maintain valid liability insurance and workers' compensation/disability proof throughout construction.
Fees
- Permit fee formula
- Residential: $0.35 per square foot; Commercial: $0.45 per square foot; fees vary by project type with published minimums
Fees change. Verify current amounts at the official fee schedule (effective January 2026).
Work That Does NOT Require a Permit
- Residential buildings 1,500 square feet or less
- Alterations costing $20,000 or less that do not affect structural stability or public safety
Important: Exemptions apply only under Education Law exceptions and still require compliance with local zoning requirements. Confirm with the Town of Bolton and Warren County Building Codes office.
Inspections
How to Schedule
- 518-761-6542 (phone)
Additional Resources
- Building code: NYS Uniform Code and NYS Energy Code
- Adirondack Park Agency Permitting
- Lake George Park Commission
- License lookup guide: New York Contractor License Requirements
- Contract template: New York Homeowner-Contractor Agreement
- New York hub: New York Contractor License & Permit Hub
Information on this page was last verified: March 2026. Permit rules and fees change — confirm current requirements directly with the Warren County Fire Prevention and Building Code Enforcement before applying.
Frequently Asked Questions
Town of Bolton Building Permit FAQ
- Do I need a building permit in Town of Bolton, NY?
- A building permit is required for all construction within Bolton under Warren County jurisdiction.
- How much does a building permit cost in Town of Bolton, NY?
- Fees are calculated as: Residential: $0.35 per square foot; Commercial: $0.45 per square foot; fees vary by project type with published minimums.
- How do I apply for a building permit in Town of Bolton, NY?
- 1. Confirm zoning and land-use compliance with the Town of Bolton first. 2. Obtain local zoning signoff on the plan set; Warren County requires plan sets signed or initialed by the town zoning officer. 3. Submit the county application, required insurance forms, and plans to Warren County Building Codes. 4. Wait for county review and permit issuance before starting work. 5. Schedule county inspections and final approval.
- How long does it take to get a building permit in Town of Bolton, NY?
- Typical processing time is Minimum 2 weeks after county submission; varies by plan complexity.
- What work is exempt from building permits in Town of Bolton, NY?
- The following work is generally exempt: Residential buildings 1,500 square feet or less; Alterations costing $20,000 or less that do not affect structural stability or public safety. Note: Exemptions apply only under Education Law exceptions and still require compliance with local zoning requirements. Confirm with the Town of Bolton and Warren County Building Codes office.
- How do I schedule a building inspection in Town of Bolton, NY?
- Inspections can be scheduled via: 518-761-6542.
Need help with your project?
Navigating permits in Town of Bolton can be complicated.
Jaspector connects you with local experts who can review your scope, verify your contractor, and help you understand what permits your project actually needs.
Learn how Jaspector worksOther cities in Warren County