City Building Permits

Village of Bellevue, WI - 2026 Building Permit Guide

How to apply for a building permit in Village of Bellevue, Wisconsin. Permit authority, application steps, fees, and inspection requirements.

Wisconsin Brown County Updated March 2026

Permit Authority

Community Development handles building permits and planning/zoning for work inside the village; Bellevue also notes Brown County regulates shoreland/wetland/floodplain areas in Bellevue by contract.

Department
Village of Bellevue Community Development - Building Inspection and Permits
Address
3100 Eaton Road, Bellevue, WI 54311
Phone
920-468-5225

Online Permit Portal

Platform: Citizen Self Service Permit Portal • Account required: Yes • Submission: In-person only

Additional resources:

Application Process

  1. Determine if the project needs a permit using Bellevue's building inspection page.
  2. For eligible residential permits, create an account in the Citizen Self Service portal; UDC permits are specifically excluded from CSS.
  3. Download the required permit packet or form if the project is not handled through CSS.
  4. Wait for review by the building inspector before paying; Bellevue states payments are not accepted through CSS.
  5. Submit payment by mail or at Village Hall/Administration Building.
  6. Receive permit and proceed to required inspections.

Source: Village of Bellevue Community Development - Building Inspection and Permits

General Requirements

Permits are required for additions or changes to exterior/interior of buildings and for electrical, heating, or plumbing work; Bellevue lists many common exterior and interior examples.

Required Documents

  • Project-specific application or packet
  • contractor information supplement where applicable
  • site plan review materials
  • and UDC/new-home materials for one-
  • two-family dwellings.
Building code
Village code and state statute are cited on the Bellevue building inspection page.

Fees

Plan check fee
Not separately posted on the extracted pages.
Reinspection fee
Village says failure to obtain a required permit may result in a double permit fee and stop-work order.
Payment note
CSS does not accept payments; applicants pay by mail or in person after review.

Fees change. Verify current amounts at the official fee schedule.

Work That Does NOT Require a Permit

  • Replace same-size windows or doors
  • Paint exterior or interior
  • Re-roof a house, unless sheathing replacement is involved
  • Re-side a house
  • Install gutters and downspouts

Inspections

How to Schedule

  • Through the village building inspection staff after permit issuance; CSS is for permit submission/tracking, not payment. (phone)
Inspection hours
Office hours shown as 7:00 a.m.-4:30 p.m. and 7:00 a.m.-noon

Typical inspection sequence: Project-specific inspections after permit issuance.

Permit page warns that the village may stop work and assess double fees if work starts without required permits.

Additional Resources

Information on this page was last verified: March 2026. Permit rules and fees change — confirm current requirements directly with the Village of Bellevue Community Development - Building Inspection and Permits before applying.

Frequently Asked Questions

Village of Bellevue Building Permit FAQ

Do I need a building permit in Village of Bellevue, WI?
Permits are required for additions or changes to exterior/interior of buildings and for electrical, heating, or plumbing work; Bellevue lists many common exterior and interior examples.
How do I apply for a building permit in Village of Bellevue, WI?
1. Determine if the project needs a permit using Bellevue's building inspection page. 2. For eligible residential permits, create an account in the Citizen Self Service portal; UDC permits are specifically excluded from CSS. 3. Download the required permit packet or form if the project is not handled through CSS. 4. Wait for review by the building inspector before paying; Bellevue states payments are not accepted through CSS. 5. Submit payment by mail or at Village Hall/Administration Building. 6. Receive permit and proceed to required inspections.
What work is exempt from building permits in Village of Bellevue, WI?
The following work is generally exempt: Replace same-size windows or doors; Paint exterior or interior; Re-roof a house, unless sheathing replacement is involved; Re-side a house; Install gutters and downspouts.
How do I schedule a building inspection in Village of Bellevue, WI?
Inspections can be scheduled via: Through the village building inspection staff after permit issuance; CSS is for permit submission/tracking, not payment..

Need help with your project?

Navigating permits in Village of Bellevue can be complicated.

Jaspector connects you with local experts who can review your scope, verify your contractor, and help you understand what permits your project actually needs.

Learn how Jaspector works
Important: This page is an educational resource provided by jaspector.com. It is not legal advice, and it does not substitute for official guidance from the permit authority listed above. Permit requirements, fees, and processes change frequently. Always verify current requirements directly with the issuing department before beginning any construction project. Use of this page does not create an attorney-client relationship. Jaspector assumes no liability for any outcomes arising from reliance on this information.

Other cities in Brown County

View all Brown County jurisdictions →