How much does a building permit cost in Town of Cleveland, UT?

The minimum permit fee is $50. Fees are calculated as: Project valuation.

How do I apply for a building permit in Town of Cleveland, UT?

1. Contact Cleveland Town Office at (435) 653-2310 or visit at 130 West Main Street to initiate the permit process. 2. Download or pick up building permit forms and checklists from the town's building permit information page. 3. Obtain zoning clearance from the town. 4. Submit county building permit application with zoning clearance and required documents to Emery County B&Z. 5. Pay permit fees. 6. Await plan review and approval. 7. Receive issued permit and post on job site. 8. Schedule inspections through county B&Z at (435) 381-5374 with 24 to 48 hours advance notice. 9. Pass final inspection and receive Certificate of Occupancy. 10. Note: Planning and Zoning Commission meetings are held at the public safety building at 130 W. Main, Cleveland at 7:00 PM.

How long does it take to get a building permit in Town of Cleveland, UT?

Typical processing time is 24 hours to several weeks depending on complexity.

What work is exempt from building permits in Town of Cleveland, UT?

The following work is generally exempt: Detached accessory structures with floor area of 200 sq ft or less; Fences not over 7 feet high; Oil derricks; Retaining walls not over 4 feet in height; Water tanks supported directly on grade, not exceeding 5,000 gallons; Sidewalks and driveways not more than 30 inches above adjacent grade; Painting, papering, tiling, carpeting, cabinets, counter tops, and similar finish work; Prefabricated swimming pools less than 24 inches deep, not greater than 5,000 gallons, installed entirely above ground; Swings and playground equipment accessory to detached one- and two-family dwellings; Window awnings supported by exterior wall; Agricultural shade cloth structures. Note: Same as county. Exemption from permit does not authorize violation of adopted codes.

How do I schedule a building inspection in Town of Cleveland, UT?

Inspections can be scheduled via: (435) 381-5374. 24 to 48 hours advance notice required.

City Building Permits

Town of Cleveland, UT - 2026 Building Permit Guide

How to apply for a building permit in Town of Cleveland, Utah. Permit authority, application steps, fees, and inspection requirements.

Utah Emery County Updated March 2026

Permit Authority

Cleveland town limits. Town handles zoning; Emery County B&Z handles building permit issuance and inspections.

Department: Cleveland Town Office
Address: 130 West Main Street, Cleveland, UT 84518
Phone: (435) 653-2310
Website: http://www.clevelandtown.org/

Application Process

Contact Cleveland Town Office at (435) 653-2310 or visit at 130 West Main Street to initiate the permit process.
Download or pick up building permit forms and checklists from the town's building permit information page.
Obtain zoning clearance from the town.
Submit county building permit application with zoning clearance and required documents to Emery County B&Z.
Pay permit fees.
Await plan review and approval.
Receive issued permit and post on job site.
Schedule inspections through county B&Z at (435) 381-5374 with 24 to 48 hours advance notice.
Pass final inspection and receive Certificate of Occupancy.
Note: Planning and Zoning Commission meetings are held at the public safety building at 130 W. Main, Cleveland at 7:00 PM.

Typical processing time: 24 hours to several weeks depending on complexity

Source: Cleveland Town Office

General Requirements

Same county baseline applies within Cleveland town limits. Town zoning clearance is required before county permit issuance.

Required Documents

Town zoning clearance
County building permit application
Site plan and construction drawings
Owner-builder certification or contractor license information

Permit validity: 180 days to commence; 180 days without suspension.
Building code: 2021 code suite per Utah Title 15A: IBC 2021, IRC 2021, IMC 2021, IPC 2021, IFGC 2021, NEC 2020, IECC 2021, Existing Building Code 2021, Utah Wildland Urban Interface Code.
Owner-builder: Same statewide rules apply per Utah Code Section 58-55-305.
Contractor requirements: Utah DOPL license required for work at $3,000 or more.

Fees

Minimum permit fee: $50
Permit fee formula: Project valuation

Fees change. Verify current amounts at the official fee schedule (effective 2025).

Work That Does NOT Require a Permit

Detached accessory structures with floor area of 200 sq ft or less
Fences not over 7 feet high
Oil derricks
Retaining walls not over 4 feet in height
Water tanks supported directly on grade, not exceeding 5,000 gallons
Sidewalks and driveways not more than 30 inches above adjacent grade
Painting, papering, tiling, carpeting, cabinets, counter tops, and similar finish work
Prefabricated swimming pools less than 24 inches deep, not greater than 5,000 gallons, installed entirely above ground
Swings and playground equipment accessory to detached one- and two-family dwellings
Window awnings supported by exterior wall
Agricultural shade cloth structures

Important: Same as county. Exemption from permit does not authorize violation of adopted codes.

Inspections

How to Schedule

(435) 381-5374 (phone)

Scheduling deadline: 24 to 48 hours advance notice required
Inspection hours: Monday through Friday, 8:30 AM to 5:00 PM

Typical inspection sequence: Same as county: footing/foundation reinforcement, rebar, under-concrete floor inspection, stitch and lag pier (manufactured homes), rough framing, rough plumbing, rough electrical, rough mechanical, insulation, power to panel, notification for exterior finishes/roofing/fireplace, rough drywall, gas line pressure test, masonry, final inspection.

Do not cover or conceal any work that requires inspection.

Additional Resources

Building code: 2021 code suite per Utah Title 15A: IBC 2021, IRC 2021, IMC 2021, IPC 2021, IFGC 2021, NEC 2020, IECC 2021, Existing Building Code 2021, Utah Wildland Urban Interface Code.
Verify contractor license: Utah DOPL Contractor Licensing
Zoning information: View zoning info
Cleveland zoning map
Town website
Building permit information and forms
Planning and Zoning
Town office contact
Town office page
License lookup guide: Utah Contractor License Requirements
Contract template: Utah Homeowner-Contractor Agreement
Utah hub: Utah Contractor License & Permit Hub

Information on this page was last verified: March 2026. Permit rules and fees change — confirm current requirements directly with the Cleveland Town Office before applying.

Frequently Asked Questions

Town of Cleveland Building Permit FAQ

Do I need a building permit in Town of Cleveland, UT?: Same county baseline applies within Cleveland town limits. Town zoning clearance is required before county permit issuance.
How much does a building permit cost in Town of Cleveland, UT?: The minimum permit fee is $50. Fees are calculated as: Project valuation.
How do I apply for a building permit in Town of Cleveland, UT?: 1. Contact Cleveland Town Office at (435) 653-2310 or visit at 130 West Main Street to initiate the permit process. 2. Download or pick up building permit forms and checklists from the town's building permit information page. 3. Obtain zoning clearance from the town. 4. Submit county building permit application with zoning clearance and required documents to Emery County B&Z. 5. Pay permit fees. 6. Await plan review and approval. 7. Receive issued permit and post on job site. 8. Schedule inspections through county B&Z at (435) 381-5374 with 24 to 48 hours advance notice. 9. Pass final inspection and receive Certificate of Occupancy. 10. Note: Planning and Zoning Commission meetings are held at the public safety building at 130 W. Main, Cleveland at 7:00 PM.
How long does it take to get a building permit in Town of Cleveland, UT?: Typical processing time is 24 hours to several weeks depending on complexity.
What work is exempt from building permits in Town of Cleveland, UT?: The following work is generally exempt: Detached accessory structures with floor area of 200 sq ft or less; Fences not over 7 feet high; Oil derricks; Retaining walls not over 4 feet in height; Water tanks supported directly on grade, not exceeding 5,000 gallons; Sidewalks and driveways not more than 30 inches above adjacent grade; Painting, papering, tiling, carpeting, cabinets, counter tops, and similar finish work; Prefabricated swimming pools less than 24 inches deep, not greater than 5,000 gallons, installed entirely above ground; Swings and playground equipment accessory to detached one- and two-family dwellings; Window awnings supported by exterior wall; Agricultural shade cloth structures. Note: Same as county. Exemption from permit does not authorize violation of adopted codes.
How do I schedule a building inspection in Town of Cleveland, UT?: Inspections can be scheduled via: (435) 381-5374. 24 to 48 hours advance notice required.

Need help with your project?

Navigating permits in Town of Cleveland can be complicated.

Jaspector connects you with local experts who can review your scope, verify your contractor, and help you understand what permits your project actually needs.

Learn how Jaspector works

Important: This page is an educational resource provided by jaspector.com. It is not legal advice, and it does not substitute for official guidance from the permit authority listed above. Permit requirements, fees, and processes change frequently. Always verify current requirements directly with the issuing department before beginning any construction project. Use of this page does not create an attorney-client relationship. Jaspector assumes no liability for any outcomes arising from reliance on this information.

Other cities in Emery County

Unincorporated Area Elmo Clawson Castledale

View all Emery County jurisdictions →