How much does a building permit cost in Moncure, NC?

The minimum permit fee is County trade permits can be $75 per trade or $100 minimum depending on category.. Fees are calculated as: County schedule uses flat, square-foot, and valuation-based methods.. Plan check fee: County residential plan review is $100 for new construction and $60 for many other residential reviews; commercial review depends on size and trade..

How do I apply for a building permit in Moncure, NC?

1. Review county zoning, watershed, subdivision, and corridor constraints for the Moncure parcel, especially because this area is subject to county planning activity and large-project review. 2. Prepare the county permit application package and any required planning or development submissions. 3. Submit through OpenGov or county Central Permitting with plans and supplemental approvals. 4. Add outside approvals where applicable, such as erosion control, wastewater, well, NCDOT, or state and federal permits. 5. Pay fees, obtain the permit, and schedule county inspections.

What work is exempt from building permits in Moncure, NC?

The following work is generally exempt: State permit exceptions under G.S. 160D-1110(c) may apply to some qualifying projects at $40,000 or less if the listed statutory triggers are not present.; Same-parameters residential water heater replacement and certain like-kind residential electrical device or fixture replacement can be exempt when statutory conditions are met.. Note: No Moncure-specific exempt-work publication was located.

How do I schedule a building inspection in Moncure, NC?

Inspections can be scheduled via: County OpenGov portal, 919-542-8293 or 919-545-8403, building.permits@chathamcountync.gov.

City Building Permits

Moncure, NC - 2026 Building Permit Guide

How to apply for a building permit in Moncure, North Carolina. Permit authority, application steps, fees, and inspection requirements.

North Carolina Chatham County Updated March 2026

Permit Authority

Moncure is treated through county permitting and county planning in the official public sources reviewed. Chatham County also has a dedicated Plan Moncure planning resource because this community is in a major growth area. No separate municipal permit office or portal was found.

Department: Chatham County Central Permitting and Building Inspections; Chatham County Planning
Address: Chatham County Central Permitting, 80 East Street, Pittsboro, NC 27312
Phone: 919-542-8293 or 919-545-8403
Email: building.permits@chathamcountync.gov
Website: https://www.chathamcountync.gov/government/departments-programs-a-h/central-permitting-inspections

Online Permit Portal

Open OpenGov

Platform: OpenGov • Account required: Yes • Submission: In-person only

Additional resources:

Application Process

Review county zoning, watershed, subdivision, and corridor constraints for the Moncure parcel, especially because this area is subject to county planning activity and large-project review.
Prepare the county permit application package and any required planning or development submissions.
Submit through OpenGov or county Central Permitting with plans and supplemental approvals.
Add outside approvals where applicable, such as erosion control, wastewater, well, NCDOT, or state and federal permits.
Pay fees, obtain the permit, and schedule county inspections.

Source: Chatham County Central Permitting and Building Inspections; Chatham County Planning

General Requirements

County permits are required for work described in G.S. 160D-1110 and county permit materials, including building and trade work.

Required Documents

County applications and checklists for residential, commercial, mobile home, demolition, owner builder, workers compensation, contractor changes, conditional power, and specialized project types

Permit validity: County uses the posted Permit Expiration Dates handout effective 2024-01-01 at https://www.chathamcountync.gov/home/showpublisheddocument/65960/638368482079000000; public text was not extractable from the file during this review.
Building code: 2018 North Carolina State Building Code and related state codes
Owner-builder: County owner-builder statement and state owner affidavit rules apply.
Contractor requirements: State licensure rules apply, including general contractor licensure at $40,000 and above and licensed electrical contractor rules.

Fees

Minimum permit fee: County trade permits can be $75 per trade or $100 minimum depending on category.
Plan check fee: County residential plan review is $100 for new construction and $60 for many other residential reviews; commercial review depends on size and trade.
Permit fee formula: County schedule uses flat, square-foot, and valuation-based methods.
Reinspection fee: County reinspection fees of $60 to $125; extra trip fee of $60.
Penalty (no permit): Work without permit double permit fee.
Payment note: County credit card transactions add 2.99% plus $0.99; no cash or check after 4:00 p.m.

Fees change. Verify current amounts at the official fee schedule.

Work That Does NOT Require a Permit

State permit exceptions under G.S. 160D-1110(c) may apply to some qualifying projects at $40,000 or less if the listed statutory triggers are not present.
Same-parameters residential water heater replacement and certain like-kind residential electrical device or fixture replacement can be exempt when statutory conditions are met.

Important: No Moncure-specific exempt-work publication was located.

Inspections

How to Schedule

County OpenGov portal (online)
919-542-8293 or 919-545-8403 (phone)
building.permits@chathamcountync.gov (email)

Inspection hours: County office hours are Monday through Friday, 8:00 a.m. to 5:00 p.m.

Typical inspection sequence: County trade roughs, framing where applicable, finals, and occupancy or compliance issuance.

Additional Resources

Building code: 2018 North Carolina State Building Code and related state codes
Zoning information: View zoning info
Plan Moncure
Chatham County GIS Services
License lookup guide: North Carolina Contractor License Requirements
Contract template: North Carolina Homeowner-Contractor Agreement
North Carolina hub: North Carolina Contractor License & Permit Hub

Information on this page was last verified: March 2026. Permit rules and fees change — confirm current requirements directly with the Chatham County Central Permitting and Building Inspections; Chatham County Planning before applying.

Frequently Asked Questions

Moncure Building Permit FAQ

Do I need a building permit in Moncure, NC?: County permits are required for work described in G.S. 160D-1110 and county permit materials, including building and trade work.
How much does a building permit cost in Moncure, NC?: The minimum permit fee is County trade permits can be $75 per trade or $100 minimum depending on category.. Fees are calculated as: County schedule uses flat, square-foot, and valuation-based methods.. Plan check fee: County residential plan review is $100 for new construction and $60 for many other residential reviews; commercial review depends on size and trade..
How do I apply for a building permit in Moncure, NC?: 1. Review county zoning, watershed, subdivision, and corridor constraints for the Moncure parcel, especially because this area is subject to county planning activity and large-project review. 2. Prepare the county permit application package and any required planning or development submissions. 3. Submit through OpenGov or county Central Permitting with plans and supplemental approvals. 4. Add outside approvals where applicable, such as erosion control, wastewater, well, NCDOT, or state and federal permits. 5. Pay fees, obtain the permit, and schedule county inspections.
What work is exempt from building permits in Moncure, NC?: The following work is generally exempt: State permit exceptions under G.S. 160D-1110(c) may apply to some qualifying projects at $40,000 or less if the listed statutory triggers are not present.; Same-parameters residential water heater replacement and certain like-kind residential electrical device or fixture replacement can be exempt when statutory conditions are met.. Note: No Moncure-specific exempt-work publication was located.
How do I schedule a building inspection in Moncure, NC?: Inspections can be scheduled via: County OpenGov portal, 919-542-8293 or 919-545-8403, building.permits@chathamcountync.gov.

Need help with your project?

Navigating permits in Moncure can be complicated.

Jaspector connects you with local experts who can review your scope, verify your contractor, and help you understand what permits your project actually needs.

Learn how Jaspector works

Important: This page is an educational resource provided by jaspector.com. It is not legal advice, and it does not substitute for official guidance from the permit authority listed above. Permit requirements, fees, and processes change frequently. Always verify current requirements directly with the issuing department before beginning any construction project. Use of this page does not create an attorney-client relationship. Jaspector assumes no liability for any outcomes arising from reliance on this information.

Other cities in Chatham County

Bennett Bonlee Bear Creek

View all Chatham County jurisdictions →