City Building Permits

Oak Grove, KY - 2026 Building Permit Guide

How to apply for a building permit in Oak Grove, Kentucky. Permit authority, application steps, fees, and inspection requirements.

Kentucky Christian County Updated March 2026

Permit Authority

All construction and zoning activity inside Oak Grove city limits under Ordinance 2025-XX.

Department
City of Oak Grove Code Enforcement
Address
P.O. Box 250, 8505 Pembroke Oak Grove Road, Oak Grove, Kentucky 42262
Phone
(270) 439-4646
Website
https://oakgroveky.org/taxes-licenses-permits/building-permit/

Application Process

  1. File a Building/Zoning Permit application with all requested owner, contractor, and building details.
  2. City reviews the site for zoning compliance and reports approval or disapproval.
  3. Provide required site plans, sketches, or utility notes including drainage, setbacks, or sign specifics.
  4. Pay calculated fees and post permit visibly.
  5. Schedule required inspections with the city inspector.
  6. Submit corrected work for reinspection as directed.

Source: City of Oak Grove Code Enforcement

General Requirements

Any construction, alteration, or relocation with a value over $1,000 must secure a building/zoning permit (Section 6-2-2).

Required Documents

  • Owner and contractor contact information
  • Building details
  • Electrical service data
  • Contractor and subcontractor lists
  • Sketch of project footprint and setbacks
Permit validity
Permits expire one year after issue; a new permit is required if work is not complete and permit must be posted visibly.
Building code
Kentucky Building Code (Title 815, Chapter 7), Kentucky Plumbing Code (Chapter 20), and Kentucky Standards of Safety (Title 815, Chapter 10).
Owner-builder
Applicants must sign a declaration accepting full responsibility for code compliance and liability, whether self-performed or subcontracted.
Contractor requirements
All subcontractors must be identified and every contractor must hold a current City of Oak Grove business license; failure to comply triggers a stop work order.

Fees

Minimum permit fee
$0
Plan check fee
Per Kentucky Building Code fee schedule established by Kentucky Department of Housing, Buildings and Construction
Permit fee formula
Valuation schedule for building work under Kentucky Building Code mirrors city/county tiers ($15 for first $1,000 plus incremental charges); residential work under Kentucky Residential Code uses $125 plus $0.13 per square foot; accessory structures $75; other fees are fixed amounts.
Reinspection fee
$50 per inspection
Penalty (no permit)
$10 for failing to post permit; $200 to $500 for working without permit plus potential stop work order
Payment note
$100 to $200 license tax plus $1,000 bond for moving structures; call (270) 439-4646 for payment options.

Fees change. Verify current amounts at the official fee schedule.

Work That Does NOT Require a Permit

Contact the City of Oak Grove Code Enforcement to confirm whether your project requires a permit before starting work.

Inspections

How to Schedule

  • (270) 439-4646 (phone)

Typical inspection sequence: Inspection fees vary with building size; electrical and other trade inspections must be completed before placing services in use; inspection fees range from $0.0825 to $0.10 per square foot with $200 minimum.

Additional Resources

Information on this page was last verified: March 2026. Permit rules and fees change — confirm current requirements directly with the City of Oak Grove Code Enforcement before applying.

Frequently Asked Questions

Oak Grove Building Permit FAQ

Do I need a building permit in Oak Grove, KY?
Any construction, alteration, or relocation with a value over $1,000 must secure a building/zoning permit (Section 6-2-2).
How much does a building permit cost in Oak Grove, KY?
The minimum permit fee is $0. Fees are calculated as: Valuation schedule for building work under Kentucky Building Code mirrors city/county tiers ($15 for first $1,000 plus incremental charges); residential work under Kentucky Residential Code uses $125 plus $0.13 per square foot; accessory structures $75; other fees are fixed amounts.. Plan check fee: Per Kentucky Building Code fee schedule established by Kentucky Department of Housing, Buildings and Construction.
How do I apply for a building permit in Oak Grove, KY?
1. File a Building/Zoning Permit application with all requested owner, contractor, and building details. 2. City reviews the site for zoning compliance and reports approval or disapproval. 3. Provide required site plans, sketches, or utility notes including drainage, setbacks, or sign specifics. 4. Pay calculated fees and post permit visibly. 5. Schedule required inspections with the city inspector. 6. Submit corrected work for reinspection as directed.
How do I schedule a building inspection in Oak Grove, KY?
Inspections can be scheduled via: (270) 439-4646.

Need help with your project?

Navigating permits in Oak Grove can be complicated.

Jaspector connects you with local experts who can review your scope, verify your contractor, and help you understand what permits your project actually needs.

Learn how Jaspector works
Important: This page is an educational resource provided by jaspector.com. It is not legal advice, and it does not substitute for official guidance from the permit authority listed above. Permit requirements, fees, and processes change frequently. Always verify current requirements directly with the issuing department before beginning any construction project. Use of this page does not create an attorney-client relationship. Jaspector assumes no liability for any outcomes arising from reliance on this information.

Other cities in Christian County

Unincorporated Area Hopkinsville Pembroke Crofton Lafayette
View all Christian County jurisdictions →