City Building Permits

Liberty, KY - 2026 Building Permit Guide

How to apply for a building permit in Liberty, Kentucky. Permit authority, application steps, fees, and inspection requirements.

Kentucky Casey County Updated March 2026

Permit Authority

All properties within the incorporated City of Liberty. The city coordinates building permits through Casey County Building Inspector Carley Fudge.

Department
City of Liberty Government, Building Department
Address
518 Middleburg Street, Liberty, KY 42539
Phone
606-787-9973 (City Hall); 270-634-4135 (Building Inspector Carley Fudge)

Application Process

  1. Contact the City of Liberty or Casey County planning office to verify local zoning and ordinance requirements before investing in detailed plans.
  2. Determine which authority (city, county, or DHBC) will review your project based on the jurisdictional split in the plan submission guide.
  3. Reach out to Building Inspector Carley Fudge at 270-634-4135 to obtain the required plan sets, checklist, and fee worksheet for your project.
  4. Prepare construction documents including site plan, floor plans, door/hardware schedules, fire and accessibility details, and specialized system drawings.
  5. Submit the full construction documents (in-person or as directed by the inspector), plan review worksheet, and plan review fee following the DHBC checklist.
  6. Address any correction comments or resubmittals as directed by the city or county.
  7. Obtain permit approval before beginning construction.

Typical processing time: No published processing time estimate. Contact Building Inspector Carley Fudge at 270-634-4135 for Liberty-specific timelines.

Source: City of Liberty Government, Building Department

General Requirements

Building permits are required for new business locations, renovations, additions, and other structural alterations within the City of Liberty that must comply with the Kentucky Building Code and any city zoning requirements.

Required Documents

  • Site plan
  • Floor plans
  • Door and hardware schedules
  • Fire and accessibility data
  • Specialized drawings and submittals
  • Wall and foundation details
  • Fire-rated assembly details
  • Mechanical, electrical, and structural documentation
  • Plan review worksheet
Permit validity
Permits are withheld until all fees are paid per Kentucky Building Code Section 121.1. Local expiration rules align with county policy.
Building code
Kentucky Building Code (2018 edition), enforced by the City of Liberty in partnership with Casey County and DHBC.
Owner-builder
Homeowner permits apply only to the owner's primary residence and must be personally performed by the owner. Cannot be used for rental properties or if the owner received a new construction permit within the prior five years.
Contractor requirements
State licenses are required for plumbing, electrical, fire suppression, and similar trades, even within the city. DHBC administers and oversees those credentials.

Fees

Plan check fee
Valuation-based: square footage multiplied by occupancy rates in Table 121.3.1 (approximately 13-16 cents per square foot). Alterations: 0.0030 times alteration cost. Fast-track increases and specialized-system fees (sprinklers, fire detection, standpipes, range hoods, suppression systems) added as needed.
Permit fee formula
Square footage times the occupancy rates in Table 121.3.1 (approximately 13-16 cents per square foot); alterations: 0.0030 times alteration cost.
Payment note
Fees must accompany the plan submittal and be paid to the Kentucky State Treasurer before a permit is released.

Fees change. Verify current amounts at the official fee schedule.

Work That Does NOT Require a Permit

Contact the City of Liberty Government, Building Department to confirm whether your project requires a permit before starting work.

Inspections

How to Schedule

  • Building Inspector Carley Fudge (phone)
Inspection hours
City Hall: Monday-Friday, 8:00 AM to 4:30 PM. Inspector's office at Casey County Health Department (199 Adams Street): Monday 8:00-9:30 AM drop-in window.

Typical inspection sequence: Ask the applicable code official for the inspection order and timing once the permit is issued.

Additional Resources

Information on this page was last verified: March 2026. Permit rules and fees change — confirm current requirements directly with the City of Liberty Government, Building Department before applying.

Frequently Asked Questions

Liberty Building Permit FAQ

Do I need a building permit in Liberty, KY?
Building permits are required for new business locations, renovations, additions, and other structural alterations within the City of Liberty that must comply with the Kentucky Building Code and any city zoning requirements.
How much does a building permit cost in Liberty, KY?
Fees are calculated as: Square footage times the occupancy rates in Table 121.3.1 (approximately 13-16 cents per square foot); alterations: 0.0030 times alteration cost.. Plan check fee: Valuation-based: square footage multiplied by occupancy rates in Table 121.3.1 (approximately 13-16 cents per square foot). Alterations: 0.0030 times alteration cost. Fast-track increases and specialized-system fees (sprinklers, fire detection, standpipes, range hoods, suppression systems) added as needed..
How do I apply for a building permit in Liberty, KY?
1. Contact the City of Liberty or Casey County planning office to verify local zoning and ordinance requirements before investing in detailed plans. 2. Determine which authority (city, county, or DHBC) will review your project based on the jurisdictional split in the plan submission guide. 3. Reach out to Building Inspector Carley Fudge at 270-634-4135 to obtain the required plan sets, checklist, and fee worksheet for your project. 4. Prepare construction documents including site plan, floor plans, door/hardware schedules, fire and accessibility details, and specialized system drawings. 5. Submit the full construction documents (in-person or as directed by the inspector), plan review worksheet, and plan review fee following the DHBC checklist. 6. Address any correction comments or resubmittals as directed by the city or county. 7. Obtain permit approval before beginning construction.
How long does it take to get a building permit in Liberty, KY?
Typical processing time is No published processing time estimate. Contact Building Inspector Carley Fudge at 270-634-4135 for Liberty-specific timelines..
How do I schedule a building inspection in Liberty, KY?
Inspections can be scheduled via: Building Inspector Carley Fudge.

Need help with your project?

Navigating permits in Liberty can be complicated.

Jaspector connects you with local experts who can review your scope, verify your contractor, and help you understand what permits your project actually needs.

Learn how Jaspector works
Important: This page is an educational resource provided by jaspector.com. It is not legal advice, and it does not substitute for official guidance from the permit authority listed above. Permit requirements, fees, and processes change frequently. Always verify current requirements directly with the issuing department before beginning any construction project. Use of this page does not create an attorney-client relationship. Jaspector assumes no liability for any outcomes arising from reliance on this information.

Other cities in Casey County

View all Casey County jurisdictions →