City Building Permits
Town of Clarksville, IN - 2026 Building Permit Guide
How to apply for a building permit in Town of Clarksville, Indiana. Permit authority, application steps, fees, and inspection requirements.
Permit Authority
Applies within Clarksville town limits; street cut and wastewater permits route outside the GovWell portal
- Department
- Building Commissioner
- Address
- 2000 Broadway Street, Clarksville, IN 47129
- Phone
- 812-288-7155
Online Permit Portal
Platform: GovWell Permit Portal • Account required: Yes • Submission: In-person only
Additional resources:
Application Process
- Create a GovWell account with an active email address.
- Apply online for the relevant permit, license, or zoning approval and upload plans/documents.
- Pay online by card, debit card, or e-check, or pay cash/check at the office.
- Town staff reviews the submission and communicates through the portal.
- After issuance, inspections can be requested through GovWell; applicants without internet access can apply from office kiosks with staff help.
Source: Building Commissioner
General Requirements
Permits are issued for construction or remodeling projects and required permits are issued through the office
Required Documents
- Permit/license application
- Uploaded drawings
- Other supporting documents through GovWell
- Building code
- Clarksville posts current codes including 2020 Indiana Residential Code, 2014 Indiana Building Code, 2012 Indiana Plumbing Code, 2009 Indiana Electric Code, 2014 Indiana Mechanical Code, 2010 Indiana Energy Code, and related state-adopted codes
- Contractor requirements
- Office grants mechanical, electrical, and plumbing licenses to contractors
Fees
- Minimum permit fee
- Residential remodel without square-foot increase $50; many trade permits also begin at $30 to $60 depending on type
- Plan check fee
- Residential plan review $35; commercial plan review starts at $0.03 or $0.05 per square foot depending on category, with $50 minimum
- Permit fee formula
- Mixed. Example: one- and two-family dwelling fees are $0.20 per square foot plus $35 plan review; residential remodel is $50 plus $0.15 per square foot of new space
- Reinspection fee
- Residential reinspections commonly $50 to $60; commercial reinspections commonly $120 depending on trade
- Payment note
- Portal accepts online payments; cash or check can also be paid at the office
Fees change. Verify current amounts at the official fee schedule.
Work That Does NOT Require a Permit
Contact the Building Commissioner to confirm whether your project requires a permit before starting work.
Inspections
How to Schedule
- Request inspections through GovWell (portal)
Typical inspection sequence: Application, review, issuance, trade/building inspections, final approval or CO when applicable
Additional Resources
- Building code: Clarksville posts current codes including 2020 Indiana Residential Code, 2014 Indiana Building Code, 2012 Indiana Plumbing Code, 2009 Indiana Electric Code, 2014 Indiana Mechanical Code, 2010 Indiana Energy Code, and related state-adopted codes
- Zoning information: View zoning info
- Building Commissioner
- SmartGov Permit Portal
- License lookup guide: Indiana Contractor License Requirements
- Contract template: Indiana Homeowner-Contractor Agreement
- Indiana hub: Indiana Contractor License & Permit Hub
Information on this page was last verified: March 2026. Permit rules and fees change — confirm current requirements directly with the Building Commissioner before applying.
Frequently Asked Questions
Town of Clarksville Building Permit FAQ
- Do I need a building permit in Town of Clarksville, IN?
- Permits are issued for construction or remodeling projects and required permits are issued through the office
- How much does a building permit cost in Town of Clarksville, IN?
- The minimum permit fee is Residential remodel without square-foot increase $50; many trade permits also begin at $30 to $60 depending on type. Fees are calculated as: Mixed. Example: one- and two-family dwelling fees are $0.20 per square foot plus $35 plan review; residential remodel is $50 plus $0.15 per square foot of new space. Plan check fee: Residential plan review $35; commercial plan review starts at $0.03 or $0.05 per square foot depending on category, with $50 minimum.
- How do I apply for a building permit in Town of Clarksville, IN?
- 1. Create a GovWell account with an active email address. 2. Apply online for the relevant permit, license, or zoning approval and upload plans/documents. 3. Pay online by card, debit card, or e-check, or pay cash/check at the office. 4. Town staff reviews the submission and communicates through the portal. 5. After issuance, inspections can be requested through GovWell; applicants without internet access can apply from office kiosks with staff help.
- How do I schedule a building inspection in Town of Clarksville, IN?
- Inspections can be scheduled via: Request inspections through GovWell.
Need help with your project?
Navigating permits in Town of Clarksville can be complicated.
Jaspector connects you with local experts who can review your scope, verify your contractor, and help you understand what permits your project actually needs.
Learn how Jaspector worksOther cities in Clark County
View all Clark County jurisdictions →